M3 cluster into a 335i who's done it?

DR-JEKL · 03-06-2013, 04:35 AM

Just curious but as the title states has anyone done this mod, and do our resident coders know how to code the cluster to suit? From what I have read a member in poland codes the cluster to suit your vin and charges ~ $350?

http://www.e90post.com/forums/showthread.php?t=464364

xtremelimit · 03-06-2013, 04:58 AM

I'd love to do this mod but too bad the shift light indicator doesn't work for us non DCT

I don't know if anyone here in Australia has done the retrofit but a few guys in the States can code the cluster for you.

DO IT!!!!!!!!!!!!!!

_ink · 03-06-2013, 05:03 AM

haha, i was looking at this last night Shane!

Need to work out what coding is needed.

DR-JEKL · 03-06-2013, 05:03 AM

Quote:

Originally Posted by xtremelimit

I'd love to do this mod but too bad the shift light indicator doesn't work for us non DCT

I don't know if anyone here in Australia has done the retrofit but a few guys in the States can code the cluster for you.

DO IT!!!!!!!!!!!!!!

What's the shift light indicator anyhow? (when the indicator lights flash?)

haha maybe but its down the track along with an LCI idrive controller and a customised trim

DR-JEKL · 03-06-2013, 05:04 AM

Quote:

Originally Posted by _ink

haha, i was looking at this last night Shane!

Need to work out what coding is needed.

That guy in poland offers some crazy products, and apparently has an agent in Australia... (Currimbin by memory)

xtremelimit · 03-06-2013, 05:14 AM

Quote:

Originally Posted by DR-JEKL

What's the shift light indicator anyhow? (when the indicator lights flash?)

haha maybe but its down the track along with an LCI idrive controller and a customised trim

Shift lights above the taco, see link below:

_ink · 03-06-2013, 05:43 AM

Quote:

Originally Posted by DR-JEKL

That guy in poland offers some crazy products, and apparently has an agent in Australia... (Currimbin by memory)

Just need a walk through and i'd be able to do it i think!

I didn't know the shift lights work on DCT????

DR-JEKL · 03-06-2013, 05:50 AM

Quote:

Originally Posted by xtremelimit

Shift lights above the taco, see link below:

Ahh now I know what you mean! Looks pretty snazzy but I could totally live without it.

I thought you meant the indicator flash thing, as when I was testing the recently installed afe intake i noticed at redline the indicators flashed up on the cluster (I hadn't seen that occur before-which goes to show I hardly ever flog it)

xtremelimit · 03-06-2013, 05:51 AM

Ink, you should get one now! hahaha

Another tread regarding the M3 cluster:
http://www.e90post.com/forums/showth...ght=m3+cluster

Stuart@BMRAutowerkes · 03-06-2013, 07:29 PM

Quote:

Originally Posted by DR-JEKL

i noticed at redline the indicators flashed up on the cluster (I hadn't seen that occur before-which goes to show I hardly ever flog it)

thats due to your tune, whether Procede or Jb4 - they do that

Alex Wu did the M3 retrofit on his 335i along with updated iDrive and Nav (and m3 widebody etc)

DR-JEKL · 03-06-2013, 09:04 PM

Quote:

Originally Posted by Stuart@BMRAutowerkes

thats due to your tune, whether Procede or Jb4 - they do that

Alex Wu did the M3 retrofit on his 335i along with updated iDrive and Nav (and m3 widebody etc)

Ahh there's a function I wasn't aware of!

Got a link to Alex Wu's car??

Stuart@BMRAutowerkes · 03-06-2013, 10:25 PM

Quote:

Originally Posted by DR-JEKL

Ahh there's a function I wasn't aware of!

Got a link to Alex Wu's car??

http://www.e90post.com/forums/showthread.php?t=567854

DR-JEKL · 03-06-2013, 10:37 PM

Quote:

Originally Posted by Stuart@BMRAutowerkes

http://www.e90post.com/forums/showthread.php?t=567854

oh fark I shouldn't have clicked on that link!!!!!!!!!!!

DR-JEKL · 03-22-2013, 07:36 AM

Hmm found a guy in Germany who can offer a P&P solution

Apparently you have to chip inside the speedometer circuitry and assign vin to suit to ensure correct mileage is displayed once installed.

Sounds pretty damn good, you guys may see this in my build thread soon

Zen · 03-22-2013, 08:12 AM

Quote:

Originally Posted by DR-JEKL

Hmm found a guy in Germany who can offer a P&P solution

Apparently you have to chip inside the speedometer circuitry and assign vin to suit to ensure correct mileage is displayed once installed.

Sounds pretty damn good, you guys may see this in my build thread soon

Have you worked out how much it will cost Shane?

_ink · 03-22-2013, 12:26 PM

Group Buy? 😉 (Organised by a vendor this time)

DR-JEKL · 04-28-2013, 10:53 PM

So no-one has done it here???

I may do this mod shortly just seeking feedback prior to jumping in, in case there are subtle differences between an 'australian' cluster & fitting a euro m3 cluster?

DR-JEKL · 04-28-2013, 10:54 PM

Quote:

Originally Posted by _ink

Just need a walk through and i'd be able to do it i think!

I didn't know the shift lights work on DCT????

I think its more then coding, you must supply your vin and mileage, and a new chip is soldered in to suit?

03-06-2013, 04:35 AM	#1
DR-JEKL Major General 909 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	M3 cluster into a 335i who's done it? Just curious but as the title states has anyone done this mod, and do our resident coders know how to code the cluster to suit? From what I have read a member in poland codes the cluster to suit your vin and charges ~ $350? http://www.e90post.com/forums/showthread.php?t=464364
	Appreciate 0 Tweet Quote

03-06-2013, 04:58 AM	#2
xtremelimit Private First Class 22 Rep 175 Posts Drives: E92 335i / E70 X5 Join Date: Feb 2013 Location: Australia iTrader: (1)	I'd love to do this mod but too bad the shift light indicator doesn't work for us non DCT I don't know if anyone here in Australia has done the retrofit but a few guys in the States can code the cluster for you. DO IT!!!!!!!!!!!!!!
	Appreciate 0 Quote

03-06-2013, 05:03 AM	#3
_ink Jedi samurai ninja turtle 636 Rep 3,021 Posts Drives: X3 M40i 2018 Join Date: May 2012 Location: Sydney, Australia iTrader: (0) Garage List 2018 X3 M40i [0.00]	haha, i was looking at this last night Shane! Need to work out what coding is needed.
	Appreciate 0 Quote

03-06-2013, 05:51 AM	#9
xtremelimit Private First Class 22 Rep 175 Posts Drives: E92 335i / E70 X5 Join Date: Feb 2013 Location: Australia iTrader: (1)	Ink, you should get one now! hahaha Another tread regarding the M3 cluster: http://www.e90post.com/forums/showth...ght=m3+cluster
	Appreciate 0 Quote

03-22-2013, 07:36 AM	#14
DR-JEKL Major General 909 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	Hmm found a guy in Germany who can offer a P&P solution Apparently you have to chip inside the speedometer circuitry and assign vin to suit to ensure correct mileage is displayed once installed. Sounds pretty damn good, you guys may see this in my build thread soon
	Appreciate 0 Quote

03-22-2013, 12:26 PM	#16
_ink Jedi samurai ninja turtle 636 Rep 3,021 Posts Drives: X3 M40i 2018 Join Date: May 2012 Location: Sydney, Australia iTrader: (0) Garage List 2018 X3 M40i [0.00]	Group Buy? 😉 (Organised by a vendor this time)
	Appreciate 0 Quote

04-28-2013, 10:53 PM	#17
DR-JEKL Major General 909 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	So no-one has done it here??? I may do this mod shortly just seeking feedback prior to jumping in, in case there are subtle differences between an 'australian' cluster & fitting a euro m3 cluster?
	Appreciate 0 Quote