[WOPALX]

Hi,

I damaged one of the BMW connectors on green loom of my proced harness. Anyway Dustin sent me a new one (appreciated as they did not charge me for it, I covered the freight cost) and gave me instructions on how to put the new one into the grey connector that plugs into the proced box.

I replaced the wires but for some reason I feel the need to double check that I have placed the wires into the correct spots before I re-install into the car.

On the grey connector I have put the black wire from the green loom (#10) into the #9 position and the green wire into the #3 position.

If Dustin/Shiv could let me know this is okay that would be great, unless another user has their sitting out of the car and can have a quick look for me.

Other wires going into the grey connector are as follows;

#2 - goes to the yellow loom
#4/5/6 - goes to the USB connector & black connector
#7 - goes to the power

Thanks in advance,

S

[OpenFlash]

Yep. That is all correct.

-shiv

[WOPALX]

Shiv,

Thanks for the fast feedback.

Regards,

S
c