|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
FS: E92 trunk setup - JLW6 - SOLD
|
|
05-07-2013, 12:25 AM | #4 |
Private
1
Rep 86
Posts |
should fit the E90 fine. Can test fit if needed.
I have everything required for it to work with the factory deck and be a clean install. Either you can use a technic harness and run from the dash, or a good quality LOC and some T connectors and not touch anything with the head unit. The signal sent to the under seat subs is then sent to these subs as well. I can send you pictures of how I have it done. It is very easy to do. I could install it all in 15 minutes as well if required. |
Appreciate
0
|
05-15-2013, 01:49 AM | #6 |
Private
1
Rep 86
Posts |
Car is tentatively sold next weekend. Can deliver in the GTA at no cost or anywhere between London and the GTA.
Will take $700 to unload it before the car sells so I dont have to lug it home. Will consider possible trades. I just need / want it gone. I have another E92 as well and will consider car parts or a nice set wheels as trade as well. |
Appreciate
0
|
05-15-2013, 01:54 AM | #7 |
I got lei'd
861
Rep 7,606
Posts |
That does look like it would fit an E90. It looks like a zenclosure but reversed. My E90 box fit exactly flush in my friends E92, no wiggling. If there is when you get this one, just velcro whatever walls touch. And unless you don't have a ski hole pass, you need to cut one out.
|
Appreciate
0
|
Bookmarks |
|
|