FS: RAC Monolite RG4 V2

astr0 · 06-28-2013, 09:58 PM

I am putting my super rare, lightweight, FORGED, RAC Monolite RG4 Version 2 for sale. These are the highest quality versions of CSL rims in the market, lighter and stronger than replica csl rims and OEM CSL/ZCP on the e46 m3's (which are cast). The reason im selling them is because I have finally decided on another set of rims and I need the space and extra cash.

I also have 18" White TE37SL's for sale. http://www.e90post.com/forums/showthread.php?t=838296

19 x 9 Front, offset is +37
19 x10 Rear, offset is +25

19.6 lbs front and 20.4 lbs rear

Wheels will come with OEM BMW centercaps AND TPMS

Information on the wheels:

* 6061 T6 Heat Treated Aluminum Alloy
* 8000 ton spread forged monoblock wheel
* Wheels have a 72.6mm center hub bore so they are HUBCENTRIC (the fit is perfect, no centering rings needed)
* Original Brilliant Silver finish from manufacturer
* Will fit 265f/285r
* BBK friendly

Background information on RAC and their manufacturing processes:

All RAC MONOLITE wheels are factory powder-coated immediately after they are forged to protect the 'raw' exposed metal from any surface corrosion. This is also done to insure that the intense heat that is applied during powder-coating process does not affect the temper or strength of the wheel. (heat-treating a wheel outside of this small manufacturing window causes embrittlement and weakening of the aluminum alloy) Some companies farm this powder-coating phase out weeks after the raw wheels have been made (to god know where) because it's a cheaper $$$ route. The quality control is usually very suspect from wheel-to-wheel by going this route.

The factory powder-coating process is the defacto no-compromise standard among ALL the the best forged wheel makers in the world today.

These wheels were made in the same foundry where NEEZ and many Ferrari wheels are crafted.

Condition is 9/10 due to slight curb rash on one front and one rear wheel (as seen in pics)
I am asking 2700 OBO for a quick sale. The wheels are located in SF / San Mateo area, local pick up.

astr0 · 07-01-2013, 05:37 PM

bump!

astr0 · 07-03-2013, 06:14 PM

bump

astr0 · 07-06-2013, 03:04 AM

bump

astr0 · 07-12-2013, 06:49 AM

astr0 · 07-19-2013, 11:57 AM

bump

astr0 · 08-13-2013, 07:03 PM

ttt

tmdals0213 · 08-13-2013, 08:00 PM

ohhh prettyyyyy BUMP GLWS!

06-28-2013, 09:58 PM	#1
astr0 Lieutenant 46 Rep 418 Posts Drives: m3 Join Date: Feb 2010 Location: sf iTrader: (12) Garage List AW/FR BMW E92 M3 [0.00]	FS: RAC Monolite RG4 V2 I am putting my super rare, lightweight, FORGED, RAC Monolite RG4 Version 2 for sale. These are the highest quality versions of CSL rims in the market, lighter and stronger than replica csl rims and OEM CSL/ZCP on the e46 m3's (which are cast). The reason im selling them is because I have finally decided on another set of rims and I need the space and extra cash. I also have 18" White TE37SL's for sale. http://www.e90post.com/forums/showthread.php?t=838296 19 x 9 Front, offset is +37 19 x10 Rear, offset is +25 19.6 lbs front and 20.4 lbs rear Wheels will come with OEM BMW centercaps AND TPMS Information on the wheels: * 6061 T6 Heat Treated Aluminum Alloy * 8000 ton spread forged monoblock wheel * Wheels have a 72.6mm center hub bore so they are HUBCENTRIC (the fit is perfect, no centering rings needed) * Original Brilliant Silver finish from manufacturer * Will fit 265f/285r * BBK friendly Background information on RAC and their manufacturing processes: All RAC MONOLITE wheels are factory powder-coated immediately after they are forged to protect the 'raw' exposed metal from any surface corrosion. This is also done to insure that the intense heat that is applied during powder-coating process does not affect the temper or strength of the wheel. (heat-treating a wheel outside of this small manufacturing window causes embrittlement and weakening of the aluminum alloy) Some companies farm this powder-coating phase out weeks after the raw wheels have been made (to god know where) because it's a cheaper $$$ route. The quality control is usually very suspect from wheel-to-wheel by going this route. The factory powder-coating process is the defacto no-compromise standard among ALL the the best forged wheel makers in the world today. These wheels were made in the same foundry where NEEZ and many Ferrari wheels are crafted. Condition is 9/10 due to slight curb rash on one front and one rear wheel (as seen in pics) I am asking 2700 OBO for a quick sale. The wheels are located in SF / San Mateo area, local pick up. Attached Images Last edited by astr0; 07-01-2013 at 05:37 PM..
	Appreciate 0 Tweet Quote

07-01-2013, 05:37 PM	#2
astr0 Lieutenant 46 Rep 418 Posts Drives: m3 Join Date: Feb 2010 Location: sf iTrader: (12) Garage List AW/FR BMW E92 M3 [0.00]	bump!
	Appreciate 0 Quote

07-03-2013, 06:14 PM	#3
astr0 Lieutenant 46 Rep 418 Posts Drives: m3 Join Date: Feb 2010 Location: sf iTrader: (12) Garage List AW/FR BMW E92 M3 [0.00]	bump
	Appreciate 0 Quote

07-06-2013, 03:04 AM	#4
astr0 Lieutenant 46 Rep 418 Posts Drives: m3 Join Date: Feb 2010 Location: sf iTrader: (12) Garage List AW/FR BMW E92 M3 [0.00]	bump
	Appreciate 0 Quote

07-12-2013, 06:49 AM	#5
astr0 Lieutenant 46 Rep 418 Posts Drives: m3 Join Date: Feb 2010 Location: sf iTrader: (12) Garage List AW/FR BMW E92 M3 [0.00]
	Appreciate 0 Quote

07-19-2013, 11:57 AM	#6
astr0 Lieutenant 46 Rep 418 Posts Drives: m3 Join Date: Feb 2010 Location: sf iTrader: (12) Garage List AW/FR BMW E92 M3 [0.00]	bump
	Appreciate 0 Quote

08-13-2013, 07:03 PM	#7
astr0 Lieutenant 46 Rep 418 Posts Drives: m3 Join Date: Feb 2010 Location: sf iTrader: (12) Garage List AW/FR BMW E92 M3 [0.00]	ttt
	Appreciate 0 Quote

08-13-2013, 08:00 PM	#8
tmdals0213 Major 225 Rep 1,412 Posts Drives: 2021 G22 Join Date: Nov 2009 Location: amazon.com/prime iTrader: (2)	ohhh prettyyyyy BUMP GLWS! __________________ Diligentia Vis Celeritas
	Appreciate 0 Quote