Help With Drivers and Inpa

Nowak · 06-29-2013, 05:29 PM

I am using Windows XP and I tried to get everything setup but I having issues. When connecting to the cable to my laptop I get a black dot for battery but no black dot for ignition. I believe it might be the drivers. I installed these: http://osefactory.com/tools/k+dcan/USB_Driver.rar but am still having issues. Any suggestions?

cptcrunch · 06-30-2013, 08:14 AM

Make sure the cable is COM1 in windows. Try turning the car on first, then plug the cable into your computer (this is assuming the obdii port is already plugged in).

pweber · 06-30-2013, 12:27 PM

Quote:

Originally Posted by cptcrunch

Make sure the cable is COM1 in windows. Try turning the car on first, then plug the cable into your computer (this is assuming the obdii port is already plugged in).

latency set to 1?
Do you have ignition turned on?

dudespb · 07-05-2013, 03:24 PM

Have you set Port=Com1 and Hardware=STD:OBD in ediabas\bin\obd.ini file?

Nowak · 07-06-2013, 12:11 PM

Yes they are set to that. I tried it again but got the same results. Ignition does not black out.

06-29-2013, 05:29 PM	#1
Nowak Enlisted Member 3 Rep 38 Posts Drives: 2010 E90 328xi Join Date: Aug 2010 Location: MN iTrader: (0)	Help With Drivers and Inpa I am using Windows XP and I tried to get everything setup but I having issues. When connecting to the cable to my laptop I get a black dot for battery but no black dot for ignition. I believe it might be the drivers. I installed these: http://osefactory.com/tools/k+dcan/USB_Driver.rar but am still having issues. Any suggestions?
	Appreciate 0 Tweet Quote

06-30-2013, 08:14 AM	#2
cptcrunch Captain Crunch 169 Rep 547 Posts Drives: 2016 340i Join Date: May 2011 Location: Cincinnati iTrader: (0)	Make sure the cable is COM1 in windows. Try turning the car on first, then plug the cable into your computer (this is assuming the obdii port is already plugged in). __________________ On Order (in transit): BMW iX 50, Oxide Grey Retired: BMW Welt Delivery 4/14/16: European Delivery - 2016 340i EBII/Saddle - ZMP \| ZCW \| ZDA \| ZLP \| ZTP \| M Adaptive \| Rear Shades \| MPPSK Before and After Dyno Retired: 2011 335D Space Grey/Black - ZSP \| ZPP \| ZCW \| 6FL \| Sat Radio \| Nav \| $600 Base Audio Upgrade
	Appreciate 0 Quote

07-05-2013, 03:24 PM	#4
dudespb New Member 0 Rep 18 Posts Drives: E92 335i JB4 AT Join Date: Jun 2013 Location: Saint-Petersburg iTrader: (0)	Have you set Port=Com1 and Hardware=STD:OBD in ediabas\bin\obd.ini file?
	Appreciate 0 Quote

07-06-2013, 12:11 PM	#5
Nowak Enlisted Member 3 Rep 38 Posts Drives: 2010 E90 328xi Join Date: Aug 2010 Location: MN iTrader: (0)	Yes they are set to that. I tried it again but got the same results. Ignition does not black out.
	Appreciate 0 Quote