[09BMW335i]

Looking into replacing the clutch on my car not sure what way to go or what brand. Do i replace the clutch and flywheel or just the clutch?

My current set-up is

21K on the car currently
FBO see signature
usually run 45% E85

Thanks

[mrbillytalent]

There are a TON of threads regarding this exact question and possible set-up and links to review and blah blah blah. Search it real quick, do some reading, then ask a more specific question and I'm sure you'll appreciate the results.

[EJ_3]

I'm running Spec Stage 2+ (clutch only). Picked it up two weeks ago and get it installed Friday. My stock clutch was slipping pass 2.3k rpm. I was going to go for the flywheel as well, until I read about it chattering. I was experiencing it when my stock hit about 80k miles a few weeks back and hated the sound and feel. The new clutch is little bit stiffer than stock (expected, but not too much) and can hold the torque I'm running. The only complaint that I have is that I didn't get it earlier. Still breaking it in, but all ready love how it grabs. Running Cobb e30 map with e40.

[Jeff@TopGearSolutions]

Originally Posted by Manny_World

I'm running Spec Stage 2+ (clutch only). Picked it up two weeks ago and get it installed Friday. My stock clutch was slipping pass 2.3k rpm. I was going to go for the flywheel as well, until I read about it chattering. I was experiencing it when my stock hit about 80k miles a few weeks back and hated the sound and feel. The new clutch is little bit stiffer than stock (expected, but not too much) and can hold the torque I'm running. The only complaint that I have is that I didn't get it earlier. Still breaking it in, but all ready love how it grabs. Running Cobb e30 map with e40.

Glad its working out for you so far

Originally Posted by 09BMW335i

Looking into replacing the clutch on my car not sure what way to go or what brand. Do i replace the clutch and flywheel or just the clutch?

My current set-up is

21K on the car currently
FBO see signature
usually run 45% E85

Thanks

Without looking at your flywheel we don't know the condition of it.

We always recommend replacing your flywheel with a new one. Whether it is a stock OEM DMFW or an upgraded Single Mass Steel Flywheel is up to you.

However, those who plan on going with upgraded turbos should get the single mass steel flywheel as the OEM DMFW cannot handle the power.