UUC Sway Bar Installation (CEA 3

!Xoible · 10-03-2007, 11:33 PM

Charlie might be the first person to install sway bars on E92 335 at his home (not a shop)

The rear sway bar install took about 3 hours. It was a PIG to fit in. We had to drop the sub frame a little bit to get the stock one out.

here are pictures of the operation, i will let Charlie comment and answer questions if you guys have.

How much did he charge? i got 3 quotes before i went to him, he charged me less than 1/2 of the cheapest quote

here are random pix of the install and the grease monkey

the ride quality is awesome. the car feels stiff as hell. cant wait to put the front ones TOMORROW (right, charlie?

)

UPDATE
this thread explains the problems that i had with this install despite my initial excitement about it
http://www.e90post.com/forums/showthread.php?t=89909

First of all i realized that the sway bar tie rod was not tightened, so it broke.

But the car still pulled to left and right, Eric@SPP very kindly and generously helped me lift it, and see that the sway bar was installed upside down and that it was hitting my steering rods, so i was able to turn the steering wheel more, but the car still pulled. Thanks to Eric@SPP for investing time in this without even being compensated for his time/effort.

My next thought was to take out my springs and take the car back to stock. Long Tran offered to take me to an alignment shop that he knows of to help me out. So i drove to his place, and there he realized that the springs were not seated correctly at the bottom, and they were not seated correctly at the top either, and they were TWISTING and moving hard every time i turned my steering wheel.

Even bushings were installed upside down, everything was messed up, it's not even funny.

Long Tran re-installed my springs, and replaced the broken parts and now my car runs nicely again. no popping noises when i turn, no extra bounciness, no pulls. car's a 335 again. It's worth mentioning that Long did not charge me for spending several hours trying to figure out my problem + time on the phone + time online.

I still have to re-install my sway bar which will happen at SPP most likely.

I got pix of all that, but they're in Long's camera. I will put a picture how the front sway should be installed.

The worst of all is that the person who installed all this doesnt bother to PM me or reply to my IM's.

I am saddened to have to post this update, and i already regret it. I am already sorry to have to post this, but I expected Charlie to act a bit more responsibly, especially that he advertises himself as a professional.

Charlie is a great fun guy to work with, but i think he should realize this shit can get people killed and he shouldnt rush his work. I hope he learns that during his UTI training.

CASHBY · 10-03-2007, 11:43 PM

What a PITA!...

let me know if anyone else needs this done!

CASHBY · 10-03-2007, 11:44 PM

Nabil the car is coming out great man!

SpecialBlend · 10-03-2007, 11:45 PM

Charlie, you are the man

!Xoible · 10-03-2007, 11:48 PM

oh yah! we also timed Charlie replacing CDV's in 5 minutes hahah

!Xoible · 10-03-2007, 11:48 PM

Quote:

Originally Posted by CEA 3

Nabil the car is coming out great man!

thanks yo

OC Guy · 10-03-2007, 11:49 PM

Charlie, you wore the same shirt yesterday!

Good install though. We need a review Nabil.

!Xoible · 10-03-2007, 11:51 PM

Quote:

Originally Posted by OC 335i

Charlie, you wore the same shirt yesterday!

Good install though. We need a review Nabil.

just come and drive my car... that's ur review

hahah

OC Guy · 10-03-2007, 11:52 PM

Quote:

Originally Posted by mantis

just come and drive my car... that's ur review

hahah

True that, I'll call you tomorrow. You free during the day again?

!Xoible · 10-03-2007, 11:54 PM

Quote:

Originally Posted by OC 335i

True that, I'll call you tomorrow. You free during the day again?

yah... txt me if i dont pick up. i will be at charlie's at some point to do front sways

CASHBY · 10-03-2007, 11:56 PM

Quote:

Originally Posted by OC 335i

Charlie, you wore the same shirt yesterday!

Good install though. We need a review Nabil.

ahahah hey i wore it after all the installs yesterday, and then woke up this morning put it on and went to work! ahahah

!Xoible · 10-04-2007, 12:04 AM

Quote:

Originally Posted by CEA 3

ahahah hey i wore it after all the installs yesterday, and then woke up this morning put it on and went to work! ahahah

oh that explains that smell... i couldnt figure it out

just kidding...

10-04-2007, 01:01 AM

damn charlie much props to you

!Xoible · 10-04-2007, 01:06 AM

Quote:

Originally Posted by that guy nico

damn charlie much props to you

dude i kicked his butt today with this install.. he well deserves it

!Xoible · 10-04-2007, 12:24 PM

hheeeeeeeeheeeeeeeeeeeeeeee... another day of sways today

doba_s · 10-04-2007, 01:10 PM

wow ... good job charlie ...

BTW mantis where did you get UUC sways ?

CASHBY · 10-04-2007, 01:14 PM

Quote:

Originally Posted by doba_s

wow ... good job charlie ...

BTW mantis where did you get UUC sways ?

Thanks Bud!

!Xoible · 10-04-2007, 01:17 PM

Quote:

Originally Posted by doba_s

wow ... good job charlie ...

BTW mantis where did you get UUC sways ?

http://www.uucmotorwerks.com/

there was a special for 425 or so. i cant find the page anymore. but if you go under suspension --> bmw --> 2006+ you will find it. they are still having the 425 special

doba_s · 10-04-2007, 01:39 PM

Quote:

Originally Posted by mantis

http://www.uucmotorwerks.com/

there was a special for 425 or so. i cant find the page anymore. but if you go under suspension --> bmw --> 2006+ you will find it. they are still having the 425 special

do you guys have any issues with UUC sways ? I just have read this thread
post #42 by Orb

http://www.e90post.com/forums/showth...t=60924&page=2

doba_s · 10-04-2007, 01:40 PM

Quote:

Originally Posted by CEA 3

Thanks Bud!

Out of topic

Charlie why are you selling your procede ?

Fartpimpson · 10-04-2007, 01:46 PM

Charlie

OC Guy · 10-04-2007, 01:47 PM

Quote:

Originally Posted by doba_s

Out of topic

Charlie why are you selling your procede ?

He's going to put a LS1 in there.

10-03-2007, 11:33 PM	#1
!Xoible Banned 881 Rep 46,010 Posts Drives: .... Join Date: Nov 2006 Location: . iTrader: (4) Garage List 2008 M3 [4.00] 2007 335i [9.00] 2008 528i [8.00] 2006 Infiniti - G35 ... [8.00]	UUC Sway Bar Installation (CEA 3 - Charlie) Charlie might be the first person to install sway bars on E92 335 at his home (not a shop) The rear sway bar install took about 3 hours. It was a PIG to fit in. We had to drop the sub frame a little bit to get the stock one out. here are pictures of the operation, i will let Charlie comment and answer questions if you guys have. How much did he charge? i got 3 quotes before i went to him, he charged me less than 1/2 of the cheapest quote here are random pix of the install and the grease monkey the ride quality is awesome. the car feels stiff as hell. cant wait to put the front ones TOMORROW (right, charlie? ) UPDATE this thread explains the problems that i had with this install despite my initial excitement about it http://www.e90post.com/forums/showthread.php?t=89909 First of all i realized that the sway bar tie rod was not tightened, so it broke. But the car still pulled to left and right, Eric@SPP very kindly and generously helped me lift it, and see that the sway bar was installed upside down and that it was hitting my steering rods, so i was able to turn the steering wheel more, but the car still pulled. Thanks to Eric@SPP for investing time in this without even being compensated for his time/effort. My next thought was to take out my springs and take the car back to stock. Long Tran offered to take me to an alignment shop that he knows of to help me out. So i drove to his place, and there he realized that the springs were not seated correctly at the bottom, and they were not seated correctly at the top either, and they were TWISTING and moving hard every time i turned my steering wheel. Even bushings were installed upside down, everything was messed up, it's not even funny. Long Tran re-installed my springs, and replaced the broken parts and now my car runs nicely again. no popping noises when i turn, no extra bounciness, no pulls. car's a 335 again. It's worth mentioning that Long did not charge me for spending several hours trying to figure out my problem + time on the phone + time online. I still have to re-install my sway bar which will happen at SPP most likely. I got pix of all that, but they're in Long's camera. I will put a picture how the front sway should be installed. The worst of all is that the person who installed all this doesnt bother to PM me or reply to my IM's. I am saddened to have to post this update, and i already regret it. I am already sorry to have to post this, but I expected Charlie to act a bit more responsibly, especially that he advertises himself as a professional. Charlie is a great fun guy to work with, but i think he should realize this shit can get people killed and he shouldnt rush his work. I hope he learns that during his UTI training. Last edited by !Xoible; 10-27-2007 at 12:13 AM..
	Appreciate 0 Tweet Quote

10-03-2007, 11:43 PM	#2
CASHBY 171 Rep 2,114 Posts Drives: E90 335 "done up" Join Date: Dec 2006 Location: GARAGE iTrader: (2)	What a PITA!... let me know if anyone else needs this done!
	Appreciate 0 Quote

10-03-2007, 11:44 PM	#3
CASHBY 171 Rep 2,114 Posts Drives: E90 335 "done up" Join Date: Dec 2006 Location: GARAGE iTrader: (2)	Nabil the car is coming out great man!
	Appreciate 0 Quote

10-03-2007, 11:45 PM	#4
SpecialBlend Captain 9 Rep 639 Posts Drives: BMW Join Date: May 2007 Location: Here iTrader: (0)	Charlie, you are the man __________________ Slowly modding..
	Appreciate 0 Quote

10-03-2007, 11:48 PM	#5
!Xoible Banned 881 Rep 46,010 Posts Drives: .... Join Date: Nov 2006 Location: . iTrader: (4) Garage List 2008 M3 [4.00] 2007 335i [9.00] 2008 528i [8.00] 2006 Infiniti - G35 ... [8.00]	oh yah! we also timed Charlie replacing CDV's in 5 minutes hahah
	Appreciate 0 Quote

10-03-2007, 11:49 PM	#7
OC Guy General 559 Rep 18,123 Posts Drives: AW 335D E90 Join Date: Oct 2006 Location: Irvine/Aliso Viejo, CA iTrader: (9) Garage List 2007 335i [0.00]	Charlie, you wore the same shirt yesterday! Good install though. We need a review Nabil. __________________ Current: 2010 Alpine White 335D LCI l 19" BBS LMs l KW V2 Coilovers l BMW Performance Grilles l MSport Front/Rear l Karbonwerke Trunk l F1 Pinnacle Tint 35% Former: E92 Space Grey 335i Latest pics
	Appreciate 0 Quote

10-04-2007, 01:01 AM	#13
nico335 Guest 0 Rep n/a Posts Drives:	damn charlie much props to you
	Appreciate 0 Quote

10-04-2007, 12:24 PM	#15
!Xoible Banned 881 Rep 46,010 Posts Drives: .... Join Date: Nov 2006 Location: . iTrader: (4) Garage List 2008 M3 [4.00] 2007 335i [9.00] 2008 528i [8.00] 2006 Infiniti - G35 ... [8.00]	hheeeeeeeeheeeeeeeeeeeeeeee... another day of sways today
	Appreciate 0 Quote

10-04-2007, 01:10 PM	#16
doba_s Major General 423 Rep 6,100 Posts Drives: X7 l Cayenne l 997.2RS Join Date: Sep 2006 Location: Danville iTrader: (26)	wow ... good job charlie ... BTW mantis where did you get UUC sways ?
	Appreciate 0 Quote

10-04-2007, 01:46 PM	#21
Fartpimpson Colonel 297 Rep 2,414 Posts Drives: E92 335i Join Date: Dec 2006 Location: Alhambra, CA iTrader: (0) Garage List 2007 E92 335i [0.00]	Charlie
	Appreciate 0 Quote