[Rat_House]

Can anyone tell me the thread pitch of the stud/nut one the downpipe where it connects to the midpipe? Mine are so corroded and stripped they need to be replaced.

[blisstik]

If the DP bolts are stripped, you probably need to remove them to take out the studs and use DP bolt kit that AR sells.

[Rat_House]

Originally Posted by blisstik

If the DP bolts are stripped, you probably need to remove them to take out the studs and use DP bolt kit that AR sells.

2 studs have already been replaced because they snapped during removal, the other 2 are still good, just looking to replace the nuts.

[blisstik]

Originally Posted by Rat_House

2 studs have already been replaced because they snapped during removal, the other 2 are still good, just looking to replace the nuts.

Just take one of the nut out and bring it to Home Depot.

[blisstik]

It's an M8. P/N 18307620549

[Rat_House]

Originally Posted by blisstik

It's an M8. P/N 18307620549

thanks!

[Tiago@VRSF]

M8x1.25