[songxl917]

OK, I am new and not very familiar with coding, I did try to code out idrive warning or lock door beep etc by myself using NCS.

I switched my front seats to M3 seats. Unfortunately, M3 seats don't have the active headrest function that my old seats have. And M3 passenger seat sensor is giving me a error code as well (not sure if it is malfunction or if the sensor was equipped at all on this M3 passenger seat).

1. Active headrest, I recan not find anything about how to code it out.
2. Passenger seat sensor, I found some coding about involving changing all the OC3 to niche_activ in ABG module. And unplug the cable at the back of the seat. (but which one, how does it look like?? pics will be appreciated). Then clear the error codes.

Can some one give me a more clear guide how to do both?

[songxl917]

BTW my E92 330 was built in Nov 2009, pre LCI. if it matters.

[songxl917]

no one knows how?

[Johnnnnny]

Originally Posted by songxl917

no one knows how?

Did you ever figure it out? I'm on the same boat

[james008]

Using NCS Expert

ABG module

AKS_LINKS_1_CD
aktiv (Make this nicht_aktiv, this is the left side active head restraint.)

AKS_RECHTS_1_CD
aktiv (Make this nicht_aktiv, this is the right side active head restraint.)

[glachhman2]

Originally Posted by james008

Using NCS Expert

ABG module

AKS_LINKS_1_CD
aktiv (Make this nicht_aktiv, this is the left side active head restraint.)

AKS_RECHTS_1_CD
aktiv (Make this nicht_aktiv, this is the right side active head restraint.)

+1 thats it

[twmtwm]

Originally Posted by james008

Using NCS Expert

ABG module

AKS_LINKS_1_CD
aktiv (Make this nicht_aktiv, this is the left side active head restraint.)

AKS_RECHTS_1_CD
aktiv (Make this nicht_aktiv, this is the right side active head restraint.)

Hello James, can you help me the code it? i install al programs and connected the car but i never code before, i am afraid to do something wrong.

[Streetlegal13]

Originally Posted by twmtwm

Hello James, can you help me the code it? i install al programs and connected the car but i never code before, i am afraid to do something wrong.

Do you still need help?