BMW 335i. What mods are people running?

Lawton438 · 09-18-2013, 09:49 AM

Just thought I would start a thread up to see what extent of tuning people have gone too.

What mods you got?

What bhp/ lbft

Most common problems you've come across?

phil200tdi · 09-18-2013, 10:07 AM

In my sig

Not sure but over 400hp and 510lb/ft.. Rolling road in a few weeks!

my problems turbos, water pump and vacuum issues...

Lawton438 · 09-18-2013, 11:47 AM

Is that at the fly or wheel?

djgandy · 09-18-2013, 12:07 PM

That'll be wheel from the spec. A JB4 alone will push near 400 fly on stock.

phil200tdi · 09-18-2013, 01:15 PM

Those numbers are fly based on my last dyno. I was losing boost at high rpm and misfiring. Which is why the 510lb/ft seems high by comparison to the bhp!

I'm not making predictions on power for the rerun in a few weeks but hope for much more...

zltm089 · 09-18-2013, 04:08 PM

Quote:

Originally Posted by djgandy

That'll be wheel from the spec. A JB4 alone will push near 400 fly on stock.

bit optimistic...

i would say more like 60 to 70 bhp....

In the US, they drive on the other side of the road and have different dynos

zltm089 · 09-18-2013, 04:10 PM

HPFP, Injectors, VANOS, vaccum lines, actuators, coil packs, spark plugs, ....

on a std car....

but once sorted, a stage 1 remap would easily give you an extra 65bhp! ....when that n54 runs good....it's a bloody strong good engine!!!....

gangzoom · 09-19-2013, 01:43 AM

Forge intercooler, aFE sealed (sort of) intake, catted AR downpipes, Procede Tube running, 380 bhp ish at the fly.

No problems with the car, but it's running a very conservative boost target and not a very good dyno run. Still more than fast enough for me. 400bhp with just a remap seems very optimistic!!

nicktyler · 09-19-2013, 04:21 AM

I dynod at 380 with just an Evolve remap. Now have Evolve intercooler, Supersprint catless DP's, BMS drop in filter and Evolve stage2.

Not had it dyno'd since the first remap though so don't know the power, What would you guys expect it to be?

I had the usual issues as well. Coils, plugs, turbos, water pump, O2 sensor.

AlanYoro35i · 09-19-2013, 06:08 AM

Was around 400. Kept up with m3 n s4 . No dyno after tune but before tune dyno at 250 bhp at the wheels.

Mods then were Cobb App stage 1 + , forge Ic and panel filter.

Coming soon New ETS IC , either downpipe or catless mids pipes.

Problems came on now after having 40k miles tune. Fuel pump,vano's and a few coils,pressure sensors. Turbo was ok but was very rattly.

djgandy · 09-19-2013, 06:21 AM

Quote:

Originally Posted by zltm089

bit optimistic...

i would say more like 60 to 70 bhp....

In the US, they drive on the other side of the road and have different dynos

306 + 70 bhp = 376 no? That's pretty near 400 and I'd say map 5 stock on a decent car will make 380/390. Anyway the point was that given the whole list of mods + meth, I think phil would be pretty disappointed if he was only getting 25bhp, 30bhp, or even 40bhp more than a stock JB4

Sparky68 · 09-19-2013, 06:36 AM

Meth should be in the region of + 30%

idnan · 09-19-2013, 12:24 PM

Pretty much everything

RB turbos, all bolt on mods including DPs, FMIC, catback exhaust, DCIs as well as meth and a few other things that I've probably forgotten

Power figures? With just a JB4 I made 384.1bhp and 437ft-lbs then on dying standard turbos with FMIC, DPs I made 410bhp and 480ft-lbs but on a more realistic DynoDynamics roller. Now? Depends if it is running right

09-18-2013, 09:49 AM	#1
Lawton438 First Lieutenant 45 Rep 393 Posts Drives: 335i Join Date: Apr 2013 Location: Stoke on trent iTrader: (2)	BMW 335i. What mods are people running? Just thought I would start a thread up to see what extent of tuning people have gone too. What mods you got? What bhp/ lbft Most common problems you've come across?
	Appreciate 0 Tweet Quote

09-18-2013, 10:07 AM	#2
phil200tdi Colonel 115 Rep 2,621 Posts Drives: 335i M Sport E90 LCI manual Join Date: Jan 2011 Location: Aylesbury iTrader: (1)	In my sig Not sure but over 400hp and 510lb/ft.. Rolling road in a few weeks! my problems turbos, water pump and vacuum issues... __________________ Car: e91 330d with Viezu map Gone but not forgotten: 2010 Jaguar XFR (Cat-back exhaust, pulley, intake mods and map), Highly Modified E90 335i LCI M Sport Manual (circa 480BHP/500lb ft)
	Appreciate 0 Quote

09-18-2013, 11:47 AM	#3
Lawton438 First Lieutenant 45 Rep 393 Posts Drives: 335i Join Date: Apr 2013 Location: Stoke on trent iTrader: (2)	Is that at the fly or wheel?
	Appreciate 0 Quote

09-18-2013, 12:07 PM	#4
djgandy Colonel 142 Rep 2,335 Posts Drives: E93 M3 Join Date: Aug 2012 Location: London iTrader: (0) Garage List 2011 M3 [0.00]	That'll be wheel from the spec. A JB4 alone will push near 400 fly on stock.
	Appreciate 0 Quote

09-18-2013, 01:15 PM	#5
phil200tdi Colonel 115 Rep 2,621 Posts Drives: 335i M Sport E90 LCI manual Join Date: Jan 2011 Location: Aylesbury iTrader: (1)	Those numbers are fly based on my last dyno. I was losing boost at high rpm and misfiring. Which is why the 510lb/ft seems high by comparison to the bhp! I'm not making predictions on power for the rerun in a few weeks but hope for much more... __________________ Car: e91 330d with Viezu map Gone but not forgotten: 2010 Jaguar XFR (Cat-back exhaust, pulley, intake mods and map), Highly Modified E90 335i LCI M Sport Manual (circa 480BHP/500lb ft)
	Appreciate 0 Quote

09-18-2013, 04:10 PM	#7
zltm089 Banned 259 Rep 7,686 Posts Drives: 335i SE Coupe Space Grey Join Date: Nov 2008 Location: LONDON iTrader: (0) Garage List 2006 BMW 335i [10.00]	HPFP, Injectors, VANOS, vaccum lines, actuators, coil packs, spark plugs, .... on a std car.... but once sorted, a stage 1 remap would easily give you an extra 65bhp! ....when that n54 runs good....it's a bloody strong good engine!!!....
	Appreciate 0 Quote

09-19-2013, 01:43 AM	#8
gangzoom Brigadier General 1809 Rep 3,414 Posts Drives: E90 335i M sport Join Date: Jun 2011 Location: Leicester iTrader: (1)	Forge intercooler, aFE sealed (sort of) intake, catted AR downpipes, Procede Tube running, 380 bhp ish at the fly. No problems with the car, but it's running a very conservative boost target and not a very good dyno run. Still more than fast enough for me. 400bhp with just a remap seems very optimistic!!
	Appreciate 0 Quote

09-19-2013, 04:21 AM	#9
nicktyler Major 33 Rep 1,271 Posts Drives: 335i (sadly gone) Join Date: Jan 2012 Location: Essex iTrader: (3) Garage List 2007 BMW E92 335i [0.00]	I dynod at 380 with just an Evolve remap. Now have Evolve intercooler, Supersprint catless DP's, BMS drop in filter and Evolve stage2. Not had it dyno'd since the first remap though so don't know the power, What would you guys expect it to be? I had the usual issues as well. Coils, plugs, turbos, water pump, O2 sensor.
	Appreciate 0 Quote

09-19-2013, 06:08 AM	#10
AlanYoro35i Senior Troll 221 Rep 3,378 Posts Drives: Coming soon-718 Cayman S Join Date: Aug 2010 Location: South West iTrader: (1)	Was around 400. Kept up with m3 n s4 . No dyno after tune but before tune dyno at 250 bhp at the wheels. Mods then were Cobb App stage 1 + , forge Ic and panel filter. Coming soon New ETS IC , either downpipe or catless mids pipes. Problems came on now after having 40k miles tune. Fuel pump,vano's and a few coils,pressure sensors. Turbo was ok but was very rattly.
	Appreciate 0 Quote

09-19-2013, 06:36 AM	#12
Sparky68 Brigadier General 798 Rep 4,360 Posts Drives: 2016 M2 Alpine White Join Date: Oct 2012 Location: Cambs UK iTrader: (11) Garage List 2016 BMW M2 [0.50] 2017 BMW F30 330D [0.00] 2014 M135 [0.00] 2007 BMW 335i [0.00]	Meth should be in the region of + 30% __________________ OG M2 7sp DCT Masata FMIC -Masata Boost Pipe - Cobra Catless DP - Powervalve Exhaust - Devilsown Methanol Injection Turbosmart BOV BM3 Stage 3 Halim custom map Pure 500
	Appreciate 0 Quote

09-19-2013, 12:24 PM	#13
idnan Lieutenant Colonel 79 Rep 1,508 Posts Drives: Alpine White 335i Join Date: Nov 2010 Location: Birmingham iTrader: (9)	Pretty much everything RB turbos, all bolt on mods including DPs, FMIC, catback exhaust, DCIs as well as meth and a few other things that I've probably forgotten Power figures? With just a JB4 I made 384.1bhp and 437ft-lbs then on dying standard turbos with FMIC, DPs I made 410bhp and 480ft-lbs but on a more realistic DynoDynamics roller. Now? Depends if it is running right
	Appreciate 0 Quote