Error codes after Lowering car??

NIBEEMER · 10-31-2013, 02:00 PM

My car is up for mot next week so im trying to get it ready... having problems with error codes on my dash..

After lowering my car a no of months back the following error codes appeared:

CC-ID 24 Dynamic Brake Control brake assist failed
CC-ID 35 DSC failed
CC-ID 50 Runflat indicator failed or tyre monitoring failure

I have lowered the car and gone from 16" wheels to 18"

The car was grand previous to this and i have read it may be a sensor has been knocked during the work or my steering sensor needs calibrated.

Any feed back or help be much appreciated or if its happened anyone else, also since the error codes appeared my DTC button doesn't seem to do anything when pressed... i get two warning lights one is a Triangle symbol with an arrow going around it and an exclamation mark the other is the break light...both are in yellow if thats any help?

Its a 320d, 2006, E90 ES

many thanks

Leah1 · 11-01-2013, 04:44 AM

Sounds like it could be an abs sensor check you haven't pulled or damaged the wiring

xenon · 11-01-2013, 05:17 AM

Definitely a wheel sensor (ABS)

NIBEEMER · 11-01-2013, 06:14 AM

Thanks lads... really hoping so... just a bit worried so many warning codes would come up for something a simple as a sensor... should be going into garage tomorrow

cage911 · 11-01-2013, 06:42 AM

100% it is the steering angle sensor has been triggered as you need to get a full alignment after lowering your car.

NIBEEMER · 11-01-2013, 10:41 AM

If it was the steering angle sensor is that a BMW only job or can anyone do that... just calibrated then would it be? a garage who aligns the wheels and steering be able to do it?

cheers

KM79 · 11-01-2013, 11:10 AM

Steering angle sensor calibration,even if a Few degrees out will flag dsc codes.takes a BMW dealer 5 mins to do

NIBEEMER · 11-01-2013, 05:51 PM

cheers for feedback much appreciated

10-31-2013, 02:00 PM	#1
NIBEEMER New Member 1 Rep 19 Posts Drives: E90 320d Join Date: Apr 2012 Location: N. Ireland iTrader: (0)	Error codes after Lowering car?? My car is up for mot next week so im trying to get it ready... having problems with error codes on my dash.. After lowering my car a no of months back the following error codes appeared: CC-ID 24 Dynamic Brake Control brake assist failed CC-ID 35 DSC failed CC-ID 50 Runflat indicator failed or tyre monitoring failure I have lowered the car and gone from 16" wheels to 18" The car was grand previous to this and i have read it may be a sensor has been knocked during the work or my steering sensor needs calibrated. Any feed back or help be much appreciated or if its happened anyone else, also since the error codes appeared my DTC button doesn't seem to do anything when pressed... i get two warning lights one is a Triangle symbol with an arrow going around it and an exclamation mark the other is the break light...both are in yellow if thats any help? Its a 320d, 2006, E90 ES many thanks Last edited by NIBEEMER; 10-31-2013 at 02:17 PM..
	Appreciate 0 Tweet Quote

11-01-2013, 04:44 AM	#2
Leah1 First Lieutenant 28 Rep 323 Posts Drives: 320d m sport Join Date: Jan 2013 Location: Space iTrader: (0)	Sounds like it could be an abs sensor check you haven't pulled or damaged the wiring
	Appreciate 0 Quote

11-01-2013, 05:17 AM	#3
xenon Major General 1471 Rep 8,200 Posts Drives: 2021 G21 330i M-Sport Join Date: Jun 2008 Location: Coventry iTrader: (0)	Definitely a wheel sensor (ABS) __________________ Ian Current: 2021 G21 330i M-Sport Previous: 2018 A6 Avant S-Line MMI+, 2014 F31 320d M-Sport, 2013 F10 520d M-Sport, 2011 F10 530d M-Sport, 2008 320i M-Sport Coupe, 2002 325i, 2001 318i valvetronic, 1998 318i, 1996 525i, 1990 Porsche 944S2
	Appreciate 0 Quote

11-01-2013, 06:14 AM	#4
NIBEEMER New Member 1 Rep 19 Posts Drives: E90 320d Join Date: Apr 2012 Location: N. Ireland iTrader: (0)	Thanks lads... really hoping so... just a bit worried so many warning codes would come up for something a simple as a sensor... should be going into garage tomorrow
	Appreciate 0 Quote

11-01-2013, 06:42 AM	#5
cage911 Lieutenant 24 Rep 425 Posts Drives: e93 Msport Join Date: Dec 2011 Location: London iTrader: (1)	100% it is the steering angle sensor has been triggered as you need to get a full alignment after lowering your car. __________________ BMW E93 Sold but not forgotten.
	Appreciate 0 Quote

11-01-2013, 10:41 AM	#6
NIBEEMER New Member 1 Rep 19 Posts Drives: E90 320d Join Date: Apr 2012 Location: N. Ireland iTrader: (0)	If it was the steering angle sensor is that a BMW only job or can anyone do that... just calibrated then would it be? a garage who aligns the wheels and steering be able to do it? cheers
	Appreciate 0 Quote

11-01-2013, 11:10 AM	#7
KM79 Major 140 Rep 1,445 Posts Drives: 2017 335D Msport Saloon Join Date: Jul 2013 Location: Scotland iTrader: (0)	Steering angle sensor calibration,even if a Few degrees out will flag dsc codes.takes a BMW dealer 5 mins to do
	Appreciate 0 Quote

11-01-2013, 05:51 PM	#8
NIBEEMER New Member 1 Rep 19 Posts Drives: E90 320d Join Date: Apr 2012 Location: N. Ireland iTrader: (0)	cheers for feedback much appreciated
	Appreciate 0 Quote