[Offset Motorwerks]

We now offer special pricing for our products for the holidays!

LOWEST PRICE ON THE FORUM GUARANTEED, WE WILL NOT BE BEAT.

Price Matching also available. - PM for pricing and info.

You can also call for questions at 626-335-0652
Installation Services available for locals.

Product Listing:

M3 Control Arm Upgrade – Contact for pricing – Install Available

Parts available separately as well.
The most cost effective handling upgrade you'll ever find!
Will add about .75 degrees of negative camber to the front for improved handling and tire wear
Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.
You will notice much more precise handling, a sportier ride, and these arms will add around .75 degrees of negative camber to the front of your BMW! Also included is an M3 headlight leveling rod which is needed to get the job done.
Includes all four M3 specific lower control arms and the headlight leveler rod.

M3 Rear Subframe Bushings – Contact for pricing – Install Available

The rear subframe bushings are vital to the performance and handling of your vehicle. Transfer of load and strain in the drivetrain and rear suspension rely on the subframe to do their job effectively. If the subframe bushings are worn, the transfer of power to the ground can be greatly compromised.
The subframe is the heart of a BMW's rear suspension. Nearly all of the suspension arms and bushings mount to the chassis through the subframe. So as the suspension deflects forces from the tires, the subframe eventually absorbs them all. Preventing too much deflection and twist in the subframe will keep your handling and alignment consistent. The stock E82 and E90/E92 rear sub-frame mounts are very soft so putting more torque through the car results in a soft or loose (squirrely) feeling in the rear suspension. This set of 4 mounts are from the M3 and are much stiffer.
These M3 rear subframe bushings are a direct replacement upgrade over the stock mounts. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well. The time and effort needed to replace them is well worth it, especially on high-horsepower cars (tuned N54, N55, etc).

M3 Rear Guide Rod Upgrade – Contact for pricing – Install Available

These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheet metal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

M3 Rear Upper Link Arm Upgrade – Install Available

These M3 rear upper link arms are an upgrade for the non-M cars. The stock non-M arms are made from sheet metal and tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

M3 Front Sway Bar E93 28mm Bar – Contact for pricing – Install Available

Bushings and Brackets Included
The front anti-roll bar is one of the keys to improving handling feel for the E82 and E9X. The larger bar is stiffer, which helps control the front tires and keep them in contact with the road. The front tires will bite harder into the turn, giving you more front grip. You'll see improved turn-in response, less understeer, and less body roll. This is one the best street suspension upgrades you can make for the E82/E9X cars. And there's almost no change in ride comfort or noise. Installation is simple for the front sway bar and takes about one hour.

Contact for other parts not listed. OEM Parts can also be ordered for you at a lower cost.

[SUHleen]

PM me best price for each part you listed and a price if I buy everything together. I am definitely interested in the control arm upgrade and if you give me the same price someone else mentioned, I can paypal right away.

[Offset Motorwerks]

PMs replied!

[Chocolate Apocalypse]

Please PM me a price on all the above shipped to 89145, thanks

[mlifxs]

please pm best price shipped to 33556 on m3 trw oem rear guide rods and rear wishbones. as a set or separately, thank you

[Offset Motorwerks]

Originally Posted by Chocolate Apocalypse

Please PM me a price on all the above shipped to 89145, thanks

PM sent!

[Offset Motorwerks]

Originally Posted by mlifxs

please pm best price shipped to 33556 on m3 trw oem rear guide rods and rear wishbones. as a set or separately, thank you

PM SENT!

[Bellbini]

I see this thread is over a year old, but do you still sell these parts? If so, can you PM me the price of everything, minus the sway bars?