Sponsored by The Tire Rack

[5soko]

I was reading on a few sites that this kit comes with a tq wrench.
I see a socket wrench in the pictures but don't see it as a tq wrench which will let you know when you have applied the necessary tq needed.

Anyone have one of these kits?

http://www.ecstuning.com/Search/Site...536/ES2530819/

[BOBKUR]

The pictures do not show a torque wrench.

[jadnashuanh]

It comes with a lug wrench, not a torque wrench, at least in the kit I saw there (for me, you link never resolved, but I did look at their site).

[VMRWheels]

Should come with a standard wrench, rather than a torque wrench.

[5soko]

Bump.. Anyone own this kit?

Originally Posted by BOBKUR

The pictures do not show a torque wrench.

supposedly the black hanlded wrench is. few guys mentioned it on other forums but i dont see how. wanted to see if anyone actually owns this kit.

Originally Posted by jadnashuanh

It comes with a lug wrench, not a torque wrench, at least in the kit I saw there (for me, you link never resolved, but I did look at their site).

Same thought as me, but supposedly the black handle wrench has 130nm written on it, not sure how it can be a tq wrench though when its angled.

Originally Posted by VMRWheels

Should come with a standard wrench, rather than a torque wrench.

Yea i just seen guys online refer to it as a tq wrench and i was confused as hell.

[joegeeZe]

Originally Posted by 5soko

I was reading on a few sites that this kit comes with a tq wrench.
I see a socket wrench in the pictures but don't see it as a tq wrench which will let you know when you have applied the necessary tq needed.

Anyone have one of these kits?

http://www.ecstuning.com/Search/Site...536/ES2530819/

I have that kit and it actually comes with a torque wrench. The fourth pic in the link shows what looks like a regular lug wrench, but its actually a torque wrench built in.

You cant actually set it to a specific torque because there are no numbers on it and the handle doesnt turn at all. But I know that its a torque wrench because when I used it to tighten the lugs it clicked like a real torque wrench would and it wouldnt let me tighten any further. Im guessing that its made to start clicking when it hits 90 lbs of torque, which I believe is what BMW recommends. I cant verify this though.

Also, the socket which comes with the wrench doesnt fit snuggly on the lugs. You have to hold the wrench in place to get a tight fit.

[mashimarho]

It does not. I got a torque wrench for Xmas. <3

[5soko]

Originally Posted by joegeeZe

I have that kit and it actually comes with a torque wrench. The fourth pic in the link shows what looks like a regular lug wrench, but its actually a torque wrench built in.

You cant actually set it to a specific torque because there are no numbers on it and the handle doesnt turn at all. But I know that its a torque wrench because when I used it to tighten the lugs it clicked like a real torque wrench would and it wouldnt let me tighten any further. Im guessing that its made to start clicking when it hits 90 lbs of torque, which I believe is what BMW recommends. I cant verify this though.

Also, the socket which comes with the wrench doesnt fit snuggly on the lugs. You have to hold the wrench in place to get a tight fit.

Awesome thanks for the info. That is what I was reading from someone that it is a one set reading tq wrench for bmw lugs.

[5soko]

Originally Posted by mashimarho

It does not. I got a torque wrench for Xmas. <3

what company? So many brands out there, other then going with snap on for 300 a wrench, I was looking to get something around 150 while still some quality.