Another will it rub thread

kayfaz · 12-27-2013, 08:46 PM

I've recently got some MV4 alloys and planning to lower the car with H&R springs next week, however I'm a little concerned if it will be too low and whether it will rub....

Tyres:
225/35/19
265/30/19

Can anyone help?

AlanYoro35i · 12-27-2013, 09:03 PM

Offset of the wheels

kayfaz · 12-27-2013, 09:04 PM

Quote:

Originally Posted by Yoro35i

Offset of the wheels

hmm how do I find that out? lol they are genuine 19" MV4s?

gaza01 · 12-27-2013, 09:42 PM

No rubbing. You will have loads of room!

kayfaz · 12-27-2013, 10:14 PM

Quote:

Originally Posted by gaza01

No ribbing. You will have loads of room!

Room for some spacers too? Or am I pushing it now?

Btw i will be keeping my MSport suspension only change the springs

kayfaz · 12-27-2013, 10:20 PM

I believe the offsets for the MV4s are ET37 8jx19 for the front and ET39 9jx19 for the rear.
Anyone confirm that?

achu · 12-27-2013, 11:33 PM

Quote:

Originally Posted by kayfaz

I believe the offsets for the MV4s are ET37 8jx19 for the front and ET39 9jx19 for the rear.
Anyone confirm that?

yup that's the correct offsets (source)...
and for spacers, i think you could have 15mm on the front and 20mm on the rear and be fine... best thing to do is put a piece of tape on your fender so a bit is hanging off, measure the distance from the tape to the tyre and see what you can do

Hotcoupe · 12-28-2013, 07:39 AM

Quote:

Originally Posted by achu

yup that's the correct offsets (source)...
and for spacers, i think you could have 15mm on the front and 20mm on the rear and be fine... best thing to do is put a piece of tape on your fender so a bit is hanging off, measure the distance from the tape to the tyre and see what you can do

Best of luck with those pearls of wisdom!

skelts · 12-28-2013, 08:51 AM

Quote:

Originally Posted by achu

yup that's the correct offsets (source)...
and for spacers, i think you could have 15mm on the front and 20mm on the rear and be fine... best thing to do is put a piece of tape on your fender so a bit is hanging off, measure the distance from the tape to the tyre and see what you can do

From experience I am going to say this wont fit at the rear. I think you could run a 15mm up front but it will prob rub on full lock on the wheel liner. The rear I don't think you will be able to go more than 12mm unless you get the arches rolled. 15mm with arches rolled.

Ajerthan · 12-28-2013, 12:27 PM

LOL. Mate you can run 12mm all round. maybe go with 10mm on the rears 100 be 100% safe.

kayfaz · 12-28-2013, 01:00 PM

Quote:

Originally Posted by Ajerthan

LOL. Mate you can run 12mm all round. maybe go with 10mm on the rears 100 be 100% safe.

hmm I'll get it lowered then have a think about spacers...

btw I'm getting a lot of looks with your wheels on, not sure if it's good or bad lol

but I'm sticking to reds for a few months

Ajerthan · 12-28-2013, 02:55 PM

Quote:

Originally Posted by kayfaz

hmm I'll get it lowered then have a think about spacers...

btw I'm getting a lot of looks with your wheels on, not sure if it's good or bad lol

but I'm sticking to reds for a few months

Lol, its a head turner.

I get loads of compliments, people comrover at service stations for chat and etc.

skelts · 12-28-2013, 03:23 PM

Quote:

Originally Posted by Ajerthan

Lol, its a head turner.

I get loads of compliments, people comrover at service stations for chat and etc.

AJ you still running my old VMR's you bought, if so get some pics up mate.

gaza01 · 12-28-2013, 05:30 PM

MV4s are 9j on the rear. My wheels are 9.5j and im running a 7mm spacer with a 265 tyre. Its very close but no rubbing at all.

achu · 12-28-2013, 11:18 PM

i'm running 19x8.5 et28 225/35 on the front with loadsa space to spare, 8.5et28 = 8et22 so et37 + 15mm spacer makes sense... and on the rear, 19x9.5 et25 with a 255/30, and i'm pretty sure there'll be enough room for 265/30 with no fender work... 9.5et25 = 9et19 so et39 + 20mm makes sense too... i guess 265/30 on a 9j would bulge a bit... also i'm low enough to scrape on humps...

not saying i'm 100% right, just backing up my spacer talk lol... i would wanna be as aggressive as possible!

E92Dan · 12-29-2013, 04:23 AM

I thought a fender was a guitar!

)

Ajerthan · 12-29-2013, 01:30 PM

Quote:

Originally Posted by skelts

AJ you still running my old VMR's you bought, if so get some pics up mate.

Unfortunately I havent had the time to put them on. I think ill now wait for warmer days. I look at them everyday in my garage tho

skelts · 12-30-2013, 11:30 AM

Quote:

Originally Posted by Ajerthan

Unfortunately I havent had the time to put them on. I think ill now wait for warmer days. I look at them everyday in my garage tho

You've had them a while now. I'd be itching to get them on but I'm inpatient

Cars gonna look awesome with them on.

12-27-2013, 08:46 PM	#1
kayfaz Lieutenant 34 Rep 573 Posts Drives: F10 Join Date: Aug 2013 Location: Reading, UK iTrader: (1)	Another will it rub thread I've recently got some MV4 alloys and planning to lower the car with H&R springs next week, however I'm a little concerned if it will be too low and whether it will rub.... Tyres: 225/35/19 265/30/19 Can anyone help? Last edited by kayfaz; 12-27-2013 at 08:57 PM..
	Appreciate 0 Tweet Quote

12-27-2013, 09:03 PM	#2
AlanYoro35i Senior Troll 224 Rep 3,378 Posts Drives: Coming soon-718 Cayman S Join Date: Aug 2010 Location: South West iTrader: (1)	Offset of the wheels
	Appreciate 0 Quote

12-27-2013, 09:42 PM	#4
gaza01 Colonel 106 Rep 2,692 Posts Drives: E92 335i Join Date: Dec 2010 Location: London iTrader: (3)	No rubbing. You will have loads of room!
	Appreciate 0 Quote

12-27-2013, 10:20 PM	#6
kayfaz Lieutenant 34 Rep 573 Posts Drives: F10 Join Date: Aug 2013 Location: Reading, UK iTrader: (1)	I believe the offsets for the MV4s are ET37 8jx19 for the front and ET39 9jx19 for the rear. Anyone confirm that?
	Appreciate 0 Quote

12-28-2013, 12:27 PM	#10
Ajerthan Bimmaaaa 27 Rep 634 Posts Drives: E46 M3 Join Date: May 2012 Location: London iTrader: (3) Garage List 2004 BMW M3 [0.00] 2009 BMW 325 [0.00]	LOL. Mate you can run 12mm all round. maybe go with 10mm on the rears 100 be 100% safe. __________________ InstaGram: Ajerthan
	Appreciate 0 Quote

12-28-2013, 05:30 PM	#14
gaza01 Colonel 106 Rep 2,692 Posts Drives: E92 335i Join Date: Dec 2010 Location: London iTrader: (3)	MV4s are 9j on the rear. My wheels are 9.5j and im running a 7mm spacer with a 265 tyre. Its very close but no rubbing at all.
	Appreciate 0 Quote

12-28-2013, 11:18 PM	#15
achu Major 110 Rep 1,184 Posts Drives: E93 335i Join Date: Aug 2013 Location: London iTrader: (0)	i'm running 19x8.5 et28 225/35 on the front with loadsa space to spare, 8.5et28 = 8et22 so et37 + 15mm spacer makes sense... and on the rear, 19x9.5 et25 with a 255/30, and i'm pretty sure there'll be enough room for 265/30 with no fender work... 9.5et25 = 9et19 so et39 + 20mm makes sense too... i guess 265/30 on a 9j would bulge a bit... also i'm low enough to scrape on humps... not saying i'm 100% right, just backing up my spacer talk lol... i would wanna be as aggressive as possible! __________________ PAST: 2007 E93 335i 6MT NOW: 2012 F10 M5 Facebook: Achu Ckr\|Twitter: AchuCkr\|Instagram: AchuCKR\|Flickr: AchuCKR\|G+: achu.ckr THE BUILD THREAD\|COMPILATION OF PHOTOS
	Appreciate 0 Quote

12-29-2013, 04:23 AM	#16
E92Dan Captain 40 Rep 842 Posts Drives: 330d Join Date: Jul 2012 Location: northampton iTrader: (0)	I thought a fender was a guitar! )
	Appreciate 0 Quote