Remove rear turbo RHD suggestions

Brule · 01-29-2014, 09:57 PM

I have removed the thermostat, water pump, front turbo.
After removing all the manifold nuts so the turbo is loose I have not figured out how this thing will come out.

I do still have one coolant line hanging loose that I have to get off.

Do you have any suggestions?

I have just spoke to some one over the phone about lifting the engine but not in detail.

07tundra · 01-29-2014, 10:09 PM

Quote:

Originally Posted by Brule

I have removed the thermostat, water pump, front turbo.
After removing all the manifold nuts so the turbo is loose I have not figured out how this thing will come out.

I do still have one coolant line hanging loose that I have to get off.

Do you have any suggestions?

I have just spoke to some one over the phone about lifting the engine but not in detail.

I just did my RBs

Call me 505 908 4916

Brule · 01-29-2014, 10:14 PM

You have LHD

Brule · 01-29-2014, 10:15 PM

Did you lift the engine or jack it up?

07tundra · 01-29-2014, 10:50 PM

Quote:

Originally Posted by Brule

Did you lift the engine or jack it up?

I have soft rubber pads I put on my floor jack and lifted it a little you must remove the motor mount and also there is a either an oil line or coolant line that runs behind the heatshield you must remove most of the little torx head screws to remove the rear turbo

Brule · 01-29-2014, 11:04 PM

cheers

I have one screw off the heat shield,
I have to go buy some rubber, I havn't removed the motor mount yet.

I've spent around 20+ hours so far

Brule · 01-30-2014, 01:29 AM

Both Turbos Out!!!

Didnt need to take motor mount out or heat shield.
Just undone rear oil line thats on top

3000GT MR · 01-31-2014, 04:14 AM

Its easy, you just have to relocate your steering wheel to the correct side! J/K. Glad to hear you got it out, let us know how the install goes

crypticc · 01-31-2014, 03:26 PM

Congrats. Why you taking it out?

Brule · 01-31-2014, 11:08 PM

Get RB's. wastegate noise was really pissing me off!

01-29-2014, 09:57 PM	#1
Brule Brigadier General 846 Rep 3,190 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Remove rear turbo RHD suggestions I have removed the thermostat, water pump, front turbo. After removing all the manifold nuts so the turbo is loose I have not figured out how this thing will come out. I do still have one coolant line hanging loose that I have to get off. Do you have any suggestions? I have just spoke to some one over the phone about lifting the engine but not in detail.
	Appreciate 0 Tweet Quote

01-29-2014, 10:14 PM	#3
Brule Brigadier General 846 Rep 3,190 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	You have LHD
	Appreciate 0 Quote

01-29-2014, 10:15 PM	#4
Brule Brigadier General 846 Rep 3,190 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Did you lift the engine or jack it up?
	Appreciate 0 Quote

01-29-2014, 11:04 PM	#6
Brule Brigadier General 846 Rep 3,190 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	cheers I have one screw off the heat shield, I have to go buy some rubber, I havn't removed the motor mount yet. I've spent around 20+ hours so far
	Appreciate 0 Quote

01-30-2014, 01:29 AM	#7
Brule Brigadier General 846 Rep 3,190 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Both Turbos Out!!! Didnt need to take motor mount out or heat shield. Just undone rear oil line thats on top
	Appreciate 0 Quote

01-31-2014, 04:14 AM	#8
3000GT MR Major 267 Rep 1,392 Posts Drives: 09 335i/3000gt vr4 Join Date: Jun 2012 Location: Sav GA iTrader: (6)	Its easy, you just have to relocate your steering wheel to the correct side! J/K. Glad to hear you got it out, let us know how the install goes __________________ Have a single turbo and/or tired of burning up O2 sensors? Ask me about the new ADV O2 sensor retro kits! 335i 2010 e92 M-sport Mods: VM Top mount 6466, Aquamist HSF4 w/custom direct port. VRSF IC + Exhaust 335i 2009 e90 665RWHP VFF900 ST RIP .
	Appreciate 0 Quote

01-31-2014, 03:26 PM	#9
crypticc Captain 80 Rep 972 Posts Drives: e92 M3 DCT + Comp Join Date: Dec 2011 Location: London, UK iTrader: (0)	Congrats. Why you taking it out?
	Appreciate 0 Quote

01-31-2014, 11:08 PM	#10
Brule Brigadier General 846 Rep 3,190 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Get RB's. wastegate noise was really pissing me off!
	Appreciate 0 Quote