|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E92 Apex 17" ARC-8 Clearance Help
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
02-10-2014, 08:47 PM | #1 |
Private
1
Rep 64
Posts |
E92 Apex 17" ARC-8 Clearance Help
Hey guys I am considering purchasing the apex ARC-8 17" track wheels for my 2007 335i coupe sport with stock suspension. Question is will the 17x9.5 wheels with nitto N05r drag radials fit in the rear with no modifications can anyone help I need to know before wednesday to get the group price deal. The setup I want to run is
Front 17x9.0 et 30 with nitto 555s 245-45-17 Rear 17x9.5 et 35 with nitro N05r 275-40-17 |
02-11-2014, 09:47 AM | #4 |
Banned
9
Rep 280
Posts |
I run the 17x9 et30 all around with 245/45/17 Nitto 555R and for the front I needed camber plates and -2.0 of negative camber up front because I was rubbing on bumps and dips in the road bad. Then again I was lowered. I think you'll be ok in the rear without a roll. I used to run 19x10 in the rear with 275s and it didn't rub.
|
Appreciate
0
|
02-11-2014, 11:24 AM | #7 |
Brigadier General
1302
Rep 4,180
Posts |
I think he means you will need the lower profile typically linear spring coilover to clear the inside if the rim against the strut/spring perch.
Stock shocks will likely have interference issues. I'm running these wheels on ASTs and they clear, just. |
Appreciate
0
|
Bookmarks |
|
|