Code to increase alarm siren...?

toicy4ya · 03-04-2014, 04:52 AM

Sup guys,

I'm looking to increase the volume on the alarm siren. I was informed there was a way of doing this via coding. Can anyone confirm if these are the correct codes? I'm not sure if this is to change the chirp volume or the siren volume.

DWAS module:
BUZZER_HIGH_LEVEL
wert_06 > wert_04
wert_07 > wert_05
wert_08

Any help would be greatly appreciated.

Alvine90 · 03-04-2014, 10:08 PM

yes it worked on my car

toicy4ya · 03-05-2014, 04:52 AM

Did it increase the volume on the siren or the chirp?

Dracon · 03-05-2014, 07:15 AM

Quote:

Originally Posted by toicy4ya

Did it increase the volume on the siren or the chirp?

It does both.

Isaiah5411 · 03-09-2015, 03:32 PM

Has anyone else done this recently? Can you also code for a different sound? My factory alarm retrofit came programmed to sound like a loud beep rather than the typical oscillating siren.

glachhman2 · 03-11-2015, 04:03 PM

http://www.e90post.com/forums/showthread.php?t=504338

Maybe that can help?

335iG · 03-16-2015, 06:45 PM

Hey, sorry to thread jack, but I am trying to achieve the same thing. I was about to create a new thread, but it maybe better to keep all information in one thread. I have read through the link provided above, but I am still unable to increase the volume of my alarm.

I have attached a copy of my current DWAS module in hopes that someone can let me know what exactly to adjust in order to maximize the alarm volume.

From what I understand the following must be adjusted, but the changes I make do not seem to stick when i write to the module:

Car: 2008 BMW 335i e92

BUZZER_LOW_LEVEL
wert_01
wert_02
wert_06
wert_07
wert_08
BUZZER_HIGH_LEVEL
wert_06
wert_07
wert_08

I have tried multiple combinations including: wert_08 only for both and it goes back to the above, starting with a low number and moving up. Nothing seems to make the alarm volume increase.

Can the coding experts please jump in here and help us all out

DWAS (335iG).txt

EndOfAnEra · 03-16-2015, 08:27 PM

I also am interested in a solution, my siren is not loud enough

335iG · 03-16-2015, 10:08 PM

Hey everyone,

I managed to figure it out. For those interested I coded the DWAS module back to factory settings using a blank .MAN file and it had the following:

BUZZER_LOW_LEVEL
wert_04
wert_05
BUZZER_HIGH_LEVEL
wert_04
wert_05

This made the alarm volume become significantly louder, all is well now

03-04-2014, 04:52 AM	#1
toicy4ya Lieutenant 57 Rep 428 Posts Drives: 06 BMW 330XI Join Date: Mar 2012 Location: NYC iTrader: (0)	Code to increase alarm siren...? Sup guys, I'm looking to increase the volume on the alarm siren. I was informed there was a way of doing this via coding. Can anyone confirm if these are the correct codes? I'm not sure if this is to change the chirp volume or the siren volume. DWAS module: BUZZER_HIGH_LEVEL wert_06 > wert_04 wert_07 > wert_05 wert_08 Any help would be greatly appreciated. __________________ 2006 330XI BSM, Terra Cotta Leather Interior, ZSP, ZPP, ZWP, ZCV, Comfort Access, Adaptive Xenon, Steptronic, Logic 7, Nav w/ IDrive
	Appreciate 0 Tweet Quote

03-04-2014, 10:08 PM	#2
Alvine90 Private First Class 7 Rep 175 Posts Drives: slow Join Date: Apr 2012 Location: Arcadia iTrader: (3)	yes it worked on my car __________________
	Appreciate 0 Quote

03-05-2014, 04:52 AM	#3
toicy4ya Lieutenant 57 Rep 428 Posts Drives: 06 BMW 330XI Join Date: Mar 2012 Location: NYC iTrader: (0)	Did it increase the volume on the siren or the chirp? __________________ 2006 330XI BSM, Terra Cotta Leather Interior, ZSP, ZPP, ZWP, ZCV, Comfort Access, Adaptive Xenon, Steptronic, Logic 7, Nav w/ IDrive
	Appreciate 0 Quote

03-09-2015, 03:32 PM	#5
Isaiah5411 Lieutenant Colonel 198 Rep 1,675 Posts Drives: 2008 Montego Blue 328i E93 Join Date: Oct 2006 Location: Modagascar iTrader: (0)	Has anyone else done this recently? Can you also code for a different sound? My factory alarm retrofit came programmed to sound like a loud beep rather than the typical oscillating siren. __________________ 2008 Montego "330i" /3.0 manifold /AA /Eurobox /PE /Alufelgen CS7 /Macht Schnell /Michelin PSS /XPel "O thou afflicted, tossed with tempest, and not comforted, behold, I will lay thy stones with fair colours, and lay thy foundations with sapphires." (Isaiah 54:11) Last edited by Isaiah5411; 03-09-2015 at 05:28 PM..
	Appreciate 0 Quote

03-11-2015, 04:03 PM	#6
glachhman2 Banned 45 Rep 303 Posts Drives: 2007 335i Join Date: Mar 2015 Location: Queens, NY iTrader: (0)	http://www.e90post.com/forums/showthread.php?t=504338 Maybe that can help?
	Appreciate 0 Quote

03-16-2015, 06:45 PM	#7
335iG Private First Class 12 Rep 185 Posts Drives: BMW Join Date: May 2014 Location: Canada iTrader: (0)	Hey, sorry to thread jack, but I am trying to achieve the same thing. I was about to create a new thread, but it maybe better to keep all information in one thread. I have read through the link provided above, but I am still unable to increase the volume of my alarm. I have attached a copy of my current DWAS module in hopes that someone can let me know what exactly to adjust in order to maximize the alarm volume. From what I understand the following must be adjusted, but the changes I make do not seem to stick when i write to the module: Car: 2008 BMW 335i e92 BUZZER_LOW_LEVEL wert_01 wert_02 wert_06 wert_07 wert_08 BUZZER_HIGH_LEVEL wert_06 wert_07 wert_08 I have tried multiple combinations including: wert_08 only for both and it goes back to the above, starting with a low number and moving up. Nothing seems to make the alarm volume increase. Can the coding experts please jump in here and help us all out DWAS (335iG).txt
	Appreciate 0 Quote

03-16-2015, 08:27 PM	#8
EndOfAnEra Lieutenant Colonel 535 Rep 1,707 Posts Drives: F16 X6 Msport Join Date: May 2012 Location: Largo, FL iTrader: (13)	I also am interested in a solution, my siren is not loud enough __________________ flickr
	Appreciate 0 Quote

03-16-2015, 10:08 PM	#9
335iG Private First Class 12 Rep 185 Posts Drives: BMW Join Date: May 2014 Location: Canada iTrader: (0)	Hey everyone, I managed to figure it out. For those interested I coded the DWAS module back to factory settings using a blank .MAN file and it had the following: BUZZER_LOW_LEVEL wert_04 wert_05 BUZZER_HIGH_LEVEL wert_04 wert_05 This made the alarm volume become significantly louder, all is well now
	Appreciate 0 Quote