![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
lighting
![]() |
![]() |
11-14-2007, 11:17 PM | #1 |
Enlisted Member
![]() 7
Rep 42
Posts |
lighting
i have the 335i coupe. i wanted to change im lighting from stock to blue but wanted it to be as close to the xeons as possible. i wanted to change the corner lights, the angel eyes, and the fogs. i already have the stock xeons. does anyone know which bulbs will match the closest?
|
11-15-2007, 08:21 AM | #3 |
LED Rules
67
Rep 789
Posts |
For the Fog.. You need h8. Your luck may vary..... some has reported no problem with HID H8 for fog.. some has warning icon.. flicking
Stock Xenon are nothing close to blue... they are a bit yellow. for blue.. look Mtech Cosmo blue...H8 for angel same as Fog... H8 Cosmo blue and corning is h3 might as well as go with the same brand
__________________
LED Pimp...
13 Audi S4... |
Appreciate
0
|
11-15-2007, 09:12 AM | #4 |
Captain
![]() ![]() ![]() ![]() 39
Rep 970
Posts |
mtec H8 will also work but it's has lower wattage output. Mtec H11 is much brighter from what folks are telling you. YOu can do a search on ebay.com. They are selling them for around 24 plus shipping per set.
|
Appreciate
0
|
11-15-2007, 10:21 AM | #6 |
Lieutenant
![]() ![]() ![]() 41
Rep 456
Posts |
There is a DIY to add resistors the the cornering bulbs to turn them off but still blink amber.
The OP has a coupe so he needs H8 for angels and fogs. There are no replacement bulbs for the corners yet. (PY24W) To change the xenons you'll need D1S bulbs. If you want them to have a blue tint, buy 6000k bulbs. Osram, Phillips, McCulloch are some brands. I have McCullochs and they shine a nice tint of blue.
__________________
2014 BMW M5 - Alpine
2014 Jeep Grand Cherokee SRT 2010 Ducati 848 |
Appreciate
0
|
11-15-2007, 11:41 AM | #8 |
Enlisted Member
![]() 7
Rep 42
Posts |
yes those are the Corner lights. So bascially the mtec lights are the way to go... I just want everything to match as close as possible. And don't want them to give a bright look also
|
Appreciate
0
|
11-15-2007, 12:22 PM | #9 |
Lieutenant Colonel
![]() ![]() 26
Rep 1,826
Posts
Drives: E92 335i
Join Date: Sep 2006
Location: Lake County, IL
|
If you want everything to match the factory xenons rather than get all blue I'd recommend Hoen Xenonmatch bulbs. They're a little off for the angel eyes (the angel-eye bulbs aren't run at full power except for DRL) but for the other fixtures they're dead on, and they don't have as much of a light loss as some of the other "blueish" halogens.
I kind of like the rings being a slightly different color than the xenons; it helps them stand out a little bit. btw: I also used the Hoen license plate bulbs, but if you have an '08 you won't need to worry about those. |
Appreciate
0
|
11-15-2007, 12:28 PM | #10 |
Lieutenant
![]() ![]() ![]() 41
Rep 456
Posts |
My bad yeah those are the cornering lights but they are H3 bulbs. What I thought he meant was the corner signal lights (PY24W).
__________________
2014 BMW M5 - Alpine
2014 Jeep Grand Cherokee SRT 2010 Ducati 848 |
Appreciate
0
|
11-15-2007, 01:54 PM | #11 | |
Enlisted Member
![]() 7
Rep 42
Posts |
Quote:
|
|
Appreciate
0
|
11-15-2007, 02:33 PM | #12 | |
Captain
![]() ![]() ![]() ![]() 39
Rep 970
Posts |
ebay
Quote:
if you go with mtec then here is the ebay info. seller: MTECPOWER email: steve@onspire.com I just bought the H11 from him and got it in 3 days. going to install it this weekend. |
|
Appreciate
0
|
11-15-2007, 04:14 PM | #13 | |
Enlisted Member
![]() 7
Rep 42
Posts |
Quote:
|
|
Appreciate
0
|
11-15-2007, 04:28 PM | #14 |
Lieutenant
![]() ![]() ![]() 41
Rep 456
Posts |
E92's use H8 or you can alter the base and fit H11 in there. I believe E90's use H11. The OP has a coupe so he needs H8.
__________________
2014 BMW M5 - Alpine
2014 Jeep Grand Cherokee SRT 2010 Ducati 848 |
Appreciate
0
|
11-15-2007, 04:33 PM | #15 |
LED Rules
67
Rep 789
Posts |
yes.. you can alter a bit the coupe's Fog base.. to fit the H11 bulb. or alter the bulb... the H8 and H11 is fairly similar with one of the three metal clip slightly larger then H8.
__________________
LED Pimp...
13 Audi S4... |
Appreciate
0
|
11-15-2007, 04:46 PM | #16 |
Enlisted Member
![]() 7
Rep 42
Posts |
How do you alter the bulb and what's the difference from the h8 and the h11 besides the metal clip
|
Appreciate
0
|
11-15-2007, 05:08 PM | #20 |
Enlisted Member
![]() 7
Rep 42
Posts |
|
Appreciate
0
|
11-15-2007, 08:05 PM | #21 |
LED Rules
67
Rep 789
Posts |
to alter.. its only cut a bigger opening for the H11 to pass through... it remain tight seal. Unless u touch the bulb.. otherwise.. it should last as long as any halogen bulb.
__________________
LED Pimp...
13 Audi S4... |
Appreciate
0
|
![]() |
Bookmarks |
|
|