Subwoofer In Ski Pass Pic Request

buster84 · 03-21-2014, 10:24 PM

I'm thinking about adding a 10tw3 to the car in the ski pass. Right now their is a lot of plastic that i'd need to remove first, but i wanted to see if anyone out their has photos of their setup that their willing to share. I searched but couldn't find much. Ideally i'd like to find e93 ski pass setup's but e92 should technically be the same. I'd also guess that the e90 ski pass would be very similar in size correct?

I'm trying to find out if a 12TW3 will fit in the ski pass? I also thought about a 13TW5 but according to the JL audio dimensions it looks like its to big for the whole. If anyone fit a 13" in their I'd love to see how you did it. I was thinking of either building an enclosure in the ski pass or running a W6 in Infinite baffle though the Ski Pass.

Thanks in advance for the pics.

mathematics · 03-21-2014, 11:26 PM

Here

buster84 · 03-23-2014, 12:05 AM

Quote:

Originally Posted by mathematics

Here

Nice!

Did you cut the board your sell or have someone make your baffle? I'm thinking about buying the 12TW3 and using building a box inside the ski hole that sticks out a tad. This sub only needs .5cf which seems like it would be a good fit for the ski hole. I wanted to do Infinite baffle, but then i'd need to buy an infinate baffle sub. Their arn't that many good ones, but i still havnt decided yet on anything for sure.

I'd love to see more setups if anyone has any. I searched google but only found about 3-4 cars. I would think that we should have at least 20+ users who have done this in the world with their e93/e92 or e90 cars in the ski pass.

Does anyone know if their are any sub boxes you can buy online that are made to fit the ski pass?

Mathematics is that a 12?

mathematics · 03-23-2014, 10:46 PM

my partner in crime at the shop did that baffle. this is a 12". it's a Dynaudio Esotar 1200 in an M3 e93. 3/4" MDF made to pressure fit inside and then screwed all around from the outside of the plastic and then covered in sound deadening.

buster84 · 03-23-2014, 11:00 PM

Quote:

Originally Posted by mathematics

my partner in crime at the shop did that baffle. this is a 12". it's a Dynaudio Esotar 1200 in an M3 e93. 3/4" MDF made to pressure fit inside and then screwed all around from the outside of the plastic and then covered in sound deadening.

Thats one expensive sub! I also just looked it up and I'm confused. I measured the front of my ski pass from top to bottom and it measured at 11.5inches, which then just confused me more since you said that sub is a 12" sub, so i decided to do some digging.

I found the subs instruction manual and found its dimensions. That sub measures as 297mm (from edge to edge) which is 11.69 inches. A 12" would have a cone diameter of a minimum of 12inches. This sub has a cone diameter of 260mm which is 10.23 Inches. That is a 10" Sub.

This information came right from the Manual. Looks like a 10" is the sub is the only thing that will fit directly in the ski whole.
http://www.dynaudio.com/int/pdf/DYN_...ochure_INT.pdf

mathematics · 03-23-2014, 11:52 PM

I welcome you to show me 12" subs that have 12" diameter of cone. Speaker diameters pretty much never mean cone diameter. It refers to overall diameter. You can do all the digging you like. Also, the brochure you linked says it's a 12" diameter driver. Did you read it??

buster84 · 03-24-2014, 12:46 AM

Quote:

Originally Posted by mathematics

I welcome you to show me 12" subs that have 12" diameter of cone. Speaker diameters pretty much never mean cone diameter. It refers to overall diameter. You can do all the digging you like. Also, the brochure you linked says it's a 12" diameter driver. Did you read it??

This is true. I looked up quite a few subs. Most have an 11" cone and sum 10.5". I wonder what constitutes a sub to be called a 12 vs a 10 ect.. Is it just the outer diameter?

6spdcoupe · 03-25-2014, 02:28 PM

Quote:

Originally Posted by mathematics

my partner in crime at the shop did that baffle. this is a 12". it's a Dynaudio Esotar 1200 in an M3 e93. 3/4" MDF made to pressure fit inside and then screwed all around from the outside of the plastic and then covered in sound deadening.

Actually, that is triple stacked 3/4" Birch.

mathematics · 03-25-2014, 02:32 PM

Quote:

Originally Posted by 6spdcoupe

Quote:

Originally Posted by mathematics

my partner in crime at the shop did that baffle. this is a 12". it's a Dynaudio Esotar 1200 in an M3 e93. 3/4" MDF made to pressure fit inside and then screwed all around from the outside of the plastic and then covered in sound deadening.

Actually, that is triple stacked 3/4" Birch.

Ah, now I remember. Oops!

TMR · 03-28-2014, 03:32 AM

mathematics · 03-28-2014, 07:51 AM

Quote:

Originally Posted by TMR

Pretty sure that's not a ski pass mount

Technic · 03-28-2014, 08:14 AM

Quote:

Originally Posted by mathematics

Pretty sure that's not a ski pass mount

That is for a very big ski.

BMWE934me · 03-28-2014, 02:47 PM

Quote:

Originally Posted by Technic

Quote:

Originally Posted by mathematics

Pretty sure that's not a ski pass mount

That is for a very big ski.

A few snowboards at least!

D-e93 · 04-01-2014, 01:12 PM

My car was barely able to fit a 12'' sub with the back panel removed.

Thread: http://www.e90post.com/forums/showthread.php?t=740579

Good luck, sounds awesome by the way.

buster84 · 04-01-2014, 04:13 PM

Quote:

Originally Posted by 2009-e93

My car was barely able to fit a 12'' sub with the back panel removed.

Thread: http://www.e90post.com/forums/showthread.php?t=740579

Good luck, sounds awesome by the way.

Wow nice setup! I got my 10TW3 and almost bought a 12 but was worried it wouldn't fit. I didn't realize the plastic piece in the middle could actually come out till i saw your pics! Man i probably could have fit a 12 lol. Since you didn't have the ski pass your ski pass looks bigger than mine. I have a plastic piece in the middle that makes it more difficult to build a box. I wonder if their is a way to remove it.

Also I just learned about Kerfing and how to bend mdf wood and figured thats probably the best way to build the small enclosure. Is that what you did or did you cut just cut and create 45" cuts to make the wood match up?

Do you happen to still have the measurements of your box? I'm looking to create exactly what you did but scale it down to 0.5 cubic feet since thats the size i need

I'm hoping that i won't need to extend it passed the exit for the .5 cubic feet but i'll need to calculate that out to find out. If anything it may extend passed the exit point by an inch or two.

I tried to measure it out but the inside plastic, but it has a lot of angles making me think about a fiberglass enclosure, but if i can remove that piece and duplicate what you did that would be even better.

I'd love to see pics of the build process of the sub if you happen to have them? I'm guessing that this is probably something you didnt so as most wouldn't unless they planned to share it online at some point.

Thanks for the picks and the links

D-e93 · 04-01-2014, 05:47 PM

Quote:

I have a plastic piece in the middle that makes it more difficult to build a box. I wonder if their is a way to remove it.

Im pretty sure there is a way to remove that panel from the back.

Quote:

Is that what you did or did you cut just cut and create 45" cuts to make the wood match up?

I did not use that technic mentioned. I cutout the bottom part first, then cut and sanded each side piece as well as I could to make it fit. I did not glue or fully screw in all the pieces until the ski-pass and the speaker were in place. It was a very tedious process but well worth it.

Quote:

Do you happen to still have the measurements of your box?

No I dont, I tried to measure it but its got many angles and knew it will not be accurate to make public. Yes, looking at it now, I would love to redo this with fiberglass and make it fit snugg.

buster84 · 04-01-2014, 06:02 PM

Quote:

Originally Posted by 2009-e93

Im pretty sure there is a way to remove that panel from the back.

I did not use that technic mentioned. I cutout the bottom part first, then cut and sanded each side piece as well as I could to make it fit. I did not glue or fully screw in all the pieces until the ski-pass and the speaker were in place. It was a very tedious process but well worth it.

No I dont, I tried to measure it but its got many angles and knew it will not be accurate to make public. Yes, looking at it now, I would love to redo this with fiberglass and make it fit snugg.

Thanks for the help. Trust me when i say i wouldnt expect this to be perfect. Making sub boxes it's self is a task at hand let alone making one with odd angles that we have.

So if im understanding you correctly, you when you created the odd shaped front piece you started with the bottom, sides, then 3 small pieces for the top? Did you cut the wood on the corners at an angle to get them to line up then sand it down? so to get the odd shape you used a total of 5 pieces correct? This count that im thinking of is excluding the rear and the front piece that the sub connects to.

Thanks again for the help and incite. I like the method of kerfing but thats only if you need a circle edge which by the look of your box its not needed and instead i can corner the wood if i can find a way to remove the plastic pieces in the middle.

safe d · 05-24-2014, 09:48 AM

Quote:

Originally Posted by TMR

Hi TMR great job on this. Busting my head trying to work out where and how this is fixed in.??

kaigoss69 · 05-24-2014, 10:13 AM

Here's my new baby! 44lbs, 16 inches

e90TiAg335i · 05-24-2014, 02:46 PM

Quote:

Originally Posted by kaigoss69

Here's my new baby! 44lbs, 16 inches

Looks great. Looks like I'll be ordering one Tuesday...

safe d · 05-28-2014, 06:07 PM

Quote:

Originally Posted by kaigoss69

Here's my new baby! 44lbs, 16 inches

Dis mus tump!!!

bf15 · 10-26-2021, 06:52 AM

Quote:

Originally Posted by mathematics

Here

Hi,

I am about to perform a similar install. except Im installing a ID max 10.

Are the 3 layers of birch screwed directly to the plastic and then inserted with the plastic surround back into the ski pass?

The plastic seem fragile. has there been any issues with it cracking, or did you do anything to add strength to the plastic? I am planning to use both halves (cabin side/trunk) of the plastic ski pass assembly in mine and just Dremel off the rear flip up piece so the magnet can fit it looks like you did something different. Did you use any screw to attach this to the metal frame inside the ski pass opening.

also it appears that you have wood going into the opening where the booster seat belt buckle is. did you use a separate piece of wood just to fill that in, or is it part of the 3 layers of birch?

03-21-2014, 10:24 PM	#1
buster84 Major 341 Rep 1,185 Posts Drives: 2009 335I X-Drive E90 Join Date: Nov 2012 Location: Orlando iTrader: (2)	Subwoofer In Ski Pass Pic Request I'm thinking about adding a 10tw3 to the car in the ski pass. Right now their is a lot of plastic that i'd need to remove first, but i wanted to see if anyone out their has photos of their setup that their willing to share. I searched but couldn't find much. Ideally i'd like to find e93 ski pass setup's but e92 should technically be the same. I'd also guess that the e90 ski pass would be very similar in size correct? I'm trying to find out if a 12TW3 will fit in the ski pass? I also thought about a 13TW5 but according to the JL audio dimensions it looks like its to big for the whole. If anyone fit a 13" in their I'd love to see how you did it. I was thinking of either building an enclosure in the ski pass or running a W6 in Infinite baffle though the Ski Pass. Thanks in advance for the pics. __________________ 2015 BMW M4 F83 2009 335i X-Drive \| GC 2.0 Turbos (sold) 2009 335i e93 (Sold) 2007 Bmw X5 (Sold)
	Appreciate 0 Tweet Quote

03-21-2014, 11:26 PM	#2
mathematics Captain 71 Rep 994 Posts Drives: 08 328i e93 alpine white Join Date: May 2009 Location: Queens, NY iTrader: (0)	Here Attached Images __________________ iPhone 6 Plus (iTunes library/iTunes radio/Waze, etc) to Airport Express via AirPlay. Toslink out of Airport Express to Helix P-Six DSP. PHD AF 1.C tweeters, PHD FB 4.1 midranges. Jehnert Door Cards and mid-bass'.
	Appreciate 0 Quote

03-23-2014, 10:46 PM	#4
mathematics Captain 71 Rep 994 Posts Drives: 08 328i e93 alpine white Join Date: May 2009 Location: Queens, NY iTrader: (0)	my partner in crime at the shop did that baffle. this is a 12". it's a Dynaudio Esotar 1200 in an M3 e93. 3/4" MDF made to pressure fit inside and then screwed all around from the outside of the plastic and then covered in sound deadening. __________________ iPhone 6 Plus (iTunes library/iTunes radio/Waze, etc) to Airport Express via AirPlay. Toslink out of Airport Express to Helix P-Six DSP. PHD AF 1.C tweeters, PHD FB 4.1 midranges. Jehnert Door Cards and mid-bass'.
	Appreciate 0 Quote

03-23-2014, 11:52 PM	#6
mathematics Captain 71 Rep 994 Posts Drives: 08 328i e93 alpine white Join Date: May 2009 Location: Queens, NY iTrader: (0)	I welcome you to show me 12" subs that have 12" diameter of cone. Speaker diameters pretty much never mean cone diameter. It refers to overall diameter. You can do all the digging you like. Also, the brochure you linked says it's a 12" diameter driver. Did you read it?? __________________ iPhone 6 Plus (iTunes library/iTunes radio/Waze, etc) to Airport Express via AirPlay. Toslink out of Airport Express to Helix P-Six DSP. PHD AF 1.C tweeters, PHD FB 4.1 midranges. Jehnert Door Cards and mid-bass'.
	Appreciate 0 Quote

03-28-2014, 03:32 AM	#10
TMR Brigadier General 398 Rep 3,159 Posts Drives: M3 Join Date: Jun 2008 Location: Torrance iTrader: (12)	__________________ 2015 M3 BPM Tuned, Eibach, Magnaflow and more www.tmrmzine.com/m3/f80 SOLD E92 Slēk Carbon Fiber Widebody M3 www.tmrmzine.com/m3/slek/ SOLD E92 335i Stage 3+ with all the toys www.tmrmzine.com/335/ SOLD E39 M5 Modded, What a great car! www.tmrmzine.com/m5/
	Appreciate 0 Quote

04-01-2014, 01:12 PM	#14
D-e93 Private 17 Rep 80 Posts Drives: Titanium e93 Join Date: Jun 2012 Location: Beamin South, FL iTrader: (0)	My car was barely able to fit a 12'' sub with the back panel removed. Thread: http://www.e90post.com/forums/showthread.php?t=740579 Good luck, sounds awesome by the way. __________________ Hi-Fi \| AudioControl D6.1200 & Crescendo-S1V2 \| FiQ 12" \| Morel MSW 265 8" \| Morel MSW 114 \| Dayton AMT Tweeters
	Appreciate 0 Quote

05-24-2014, 10:13 AM	#19
kaigoss69 Brigadier General 301 Rep 3,969 Posts Drives: '08 335i Join Date: Jul 2008 Location: JAX iTrader: (6)	Here's my new baby! 44lbs, 16 inches __________________ Mobridge DA2 > JBL MS-8 > ARC XDi 600/4 > JBL Gti 408 Mids & Vifa OT19 Tweeters; PG Ti2 1600.5 > Morel HCW-10 & IDMax 15 Last edited by kaigoss69; 05-24-2014 at 01:42 PM..
	Appreciate 0 Quote