[mrtanz]

Hi All

Been a while since i have done a bit of coding but got the following problem

Car has been retrofitted with Xenon (non AHL)
Upgraded to FRM3

Now error regarding lights appears and windows do not work.
I have tried to access the NFRM module through NCSEXPERT however i keep keeping "object file not found"
Ufofruntaely i overwrote the error log file so i cant give you the file name.

I have tried multiple versions of daten files but i am getting a bit confused to check which version of files i am using.

Any ideas?

[mrtanz]

Here is the error log

ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
SYS-0005: OBJECT FILE NOT FOUND

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_PL2FRX

>> ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
SYS-0005: OBJECT FILE NOT FOUND

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN

ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
SYS-0005: OBJECT FILE NOT FOUND

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_PL2FRX

>> ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
SYS-0005: OBJECT FILE NOT FOUND

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
FA_WRITE

>> ERROR! Modul: COAPI4.CPP, Proc: coapiWriteAuftrag, LineNr: 06, ErrorNr: 2000
FA_WRITE: A_PL2FRX

[Sensible_]

Have you changed anything in your DATEN files recently? I suggest get later DATEN files and install using ' BMW Coding Tool.

[mrtanz]

Havent changed anything besdies changing PCs
but i just copied across the folders and re-did the obdsetup and com settings
Would you have a link you can PM me with the latest daten files?
Also i cant find instructions on how to update the files using the BMW coding Tool
I have installed the BMW standard tols but cant find an extra utility

[mrtanz]

Update:
There were no issues with my files
in the VO codes were $7ka & -OSNU
I removed both those from the VO and did a FA_Write.
Then i was able to code the car.
To overcome the window issue i wrote an empty .MAN file to the NFRM module.

Howver when checking the NFRM i cant see the WALBUE or KALTUE to remove the cold and warm bulb checks.