|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Yay or nay?Cosmetic opinion
|
|
05-01-2014, 05:05 PM | #1 |
Private
14
Rep 55
Posts |
Yay or nay?Cosmetic opinion
To sum it up, some dickhead at best buy backed up into my BMW. He punctured right through the bumper, and crushed my hood. (It was a Explorer). Anyways, Since OEM is like 650 for a hood, and I don't personally like the stock look, should I purchase this m3-style vented plastic hood from this guy?
This is my car this is the replacement hood This is what he's offering me "100% fitment guaranty or your money back."He said refund on the shipping, and the hood. The bumper....I'm just going to stick with the OEM bumper and eventually just buy a lip or something. Converting it from Stock to M3 front sounds costly.(because of the fog lights) So let me know guys...thanks. Also ..... It is made for the E92 pre and post face lift since the hood didn't change. So I'm guessing it'll fit my car. Amirite? |
05-01-2014, 07:06 PM | #2 | |
Brotographer
91
Rep 1,742
Posts |
Quote:
Woahwoah hold up. Before you go spending money, you should be aware the front end of the E92/93 LCI changed significantly from its Pre-LCI counterpart in comparison to the E90/91 LCI and Pre-LCI. The E90 LCI headlights can very easily be installed in a Pre-LCI vehicle, because the body panel openings are the same shape. While the bumpers and the hood may look different, they are dimensionally identical where body panels meet. This is not the case for the E92/93 LCI. The front fenders are a different shape, and are not cross-compatible. The grilles are a different shape, so the bumpers and the hood aren't cross-compatible. Even the headlights are a different shape, so in order to retrofit E92 LCI headlights on to a E92 Pre-LCI, you need an entirely new front end So my point is, if that hood is designed for a E92 Pre-LCI (and it probably is) you're gonna have a very bad time. Even the E92 LCI M3 kept the Pre-LCI front end so the factory didn't have to re-tool the molds for the front fenders, bumpers, and hood, just so they could get the new headlights. |
|
Appreciate
1
|
05-01-2014, 07:39 PM | #3 | |
Private
14
Rep 55
Posts |
Quote:
Now time to find the proper hood! |
|
Appreciate
0
|
05-01-2014, 10:58 PM | #4 |
Captain Dutch Rudder
208
Rep 2,258
Posts |
Rollinstone summed it up great.
But you can find a m3 replica front bumper made to fit your car without having to modify any of the other body panels. And in my opinion, there are a lot sweeter hoods than an m3 rep.
__________________
No more E92 or E82
|
Appreciate
1
|
05-02-2014, 10:16 PM | #6 | |
Brotographer
91
Rep 1,742
Posts |
Quote:
I honestly think your most cost effective solution is going to be to use the insurance check to get the OEM LCI hood, and call it a day. The only option I know of is the Duke Dynamics D4 PowerDome hood (can be had with or without vents) but it starts at $900 and goes up for double-sided CF. So it's a pretty expensive piece to say the least. |
|
Appreciate
1
|
05-02-2014, 11:06 PM | #7 | |
Private
14
Rep 55
Posts |
Quote:
I appreciate the help .Thanks I'll look into some aftermarket lci bumpers. Hopefully those exist, and aren't too expensive. If not I'll probably end up purchasing a oem off of here for a good price. |
|
Appreciate
0
|
05-03-2014, 03:37 AM | #8 | |
Brotographer
91
Rep 1,742
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|