Has anyone installed exhaust on rhino ramps?

vasillalov · 06-16-2010, 11:14 AM

Quote:

Originally Posted by mkPOTO

its all good you might be talking about ultimate (mike) you have a 335i coupe correct? silver with mtech rear and mtech front lip?

Aaaah! Yes yes! Now I remember! Hehehe!

FLA 335 · 06-16-2010, 12:41 PM

PASSS!!! hard enough on your own/one person with a lift... you also need a special inverted torque... if you dont have it... dont bother... + you will need an impact gun to make sure all bolts are back to torque spec.

vasillalov · 06-16-2010, 01:58 PM

Hehehe! Ok, I guess I'll do a DIY just for you then huh?

FLA 335 · 06-16-2010, 04:28 PM

Quote:

Originally Posted by vasillalov

Hehehe! Ok, I guess I'll do a DIY just for you then huh?

im good... rolling stock son...

Texox · 06-16-2010, 05:09 PM

I installed full exhaust (headers, catback, etc) on a lowered vette on jack stands and rhino ramps. It was a tight squeeze under the car but me and a friend were able to do it ourselves over a weekend... I'm sure you would have no problem doing this with a BMW.

vasillalov · 06-16-2010, 06:15 PM

^^ Thanks for the encouragement.

I'll get it started today!

Vasil

Texox · 06-16-2010, 07:31 PM

Quote:

Originally Posted by vasillalov

^^ Thanks for the encouragement.

I'll get it started today!

Vasil

No prob! Good luck with the install! I might recommend getting something to help hold up the exhaust under the car while you are getting everything in place/tightening. I actually was able to use a jackstand under the car to help keep the exhaust in place while I was tightening. I'm not sure how long/heavy the exhaust on the BMW's are so it might be a good idea. Good luck!!

vasillalov · 06-16-2010, 10:03 PM

I just got a deal on the rhino ramps. My local Pepboys were selling the 12,000 lbs ones for $34.00, down from $55.00.

I tried them by backing the car on to them and it looks like there is PLENTY of space and they will be perfect for future oil changes as well. I believe that once the front is lifted on jackstands, it will be rather easy to do the install.

Vasil

bimmertt · 06-16-2010, 10:46 PM

Quote:

Originally Posted by FLA 335

PASSS!!! hard enough on your own/one person with a lift... you also need a special inverted torque... if you dont have it... dont bother... + you will need an impact gun to make sure all bolts are back to torque spec.

+1...attempted to do an exhaust install once when the car was on stands/ramps and will never attempt to do it again. not much room to work with so it is hard to get any leverage. rusted bolts were also a huge problem.

vasillalov · 06-17-2010, 11:20 AM

Quote:

Originally Posted by FLA 335

you also need a special inverted torque...

???? special, inverted torque WHAT? Wrench? Adapter?

mkPOTO · 06-17-2010, 11:22 AM

how did it go?

vasillalov · 06-17-2010, 11:28 AM

Quote:

Originally Posted by mkPOTO

how did it go?

Will work on it tonight or tomorrow. I am hoping to install it before the WSTO meet on Saturday.

Vasil

FLA 335 · 06-17-2010, 11:57 AM

Quote:

Originally Posted by vasillalov

???? special, inverted torque WHAT? Wrench? Adapter?

yes if you want to simmply remove the hangers with the exahust (easier way for me, i had an inverted torque 3/8 adapter... you can purchase at autozone, or napa...)

vasillalov · 06-17-2010, 12:05 PM

Quote:

Originally Posted by FLA 335

yes if you want to simmply remove the hangers with the exahust (easier way for me, i had an inverted torque 3/8 adapter... you can purchase at autozone, or napa...)

I see. Thanks for the heads up. I think I'll keep the exhaust hangers installed and slide actual exhaust off the hangers...

ragingclue · 06-17-2010, 12:07 PM

Do you mean inverted torx?

vasillalov · 06-17-2010, 12:30 PM

Quote:

Originally Posted by ragingclue

Do you mean inverted torx?

If this is what he means, then yes, I already have those.

mkPOTO · 06-17-2010, 12:50 PM

gotcha, good luck

06-16-2010, 12:41 PM	#24
FLA 335 Captain 25 Rep 746 Posts Drives: 2009 335i (SOLD) !!!!! Join Date: Sep 2009 Location: Miami Fl iTrader: (7)	PASSS!!! hard enough on your own/one person with a lift... you also need a special inverted torque... if you dont have it... dont bother... + you will need an impact gun to make sure all bolts are back to torque spec. __________________ 2009 BMW 335i Sedan / Auto / Paddles / Sport / BMW Assist / Heated seats / JB Matte Black Grill / Tischer First Aid Kit w\Triangle / Tischer Hood Pad / "Custom" rear fog switch <---- SOLD!!!!
	Appreciate 0 Quote

06-16-2010, 01:58 PM	#25
vasillalov Mad Linux Guru On The Loose 1195 Rep 5,455 Posts Drives: 2008 335i Sedan, 2023 M3 Join Date: Aug 2009 Location: Chicago, IL iTrader: (5) Garage List 2023 BMW M3 [0.00] 2008 335i E90 [8.00]	Hehehe! Ok, I guess I'll do a DIY just for you then huh?
	Appreciate 0 Quote

06-16-2010, 05:09 PM	#27
Texox Second Lieutenant 77 Rep 240 Posts Drives: 2021 M550i Join Date: Jun 2010 Location: Dallas, Texas iTrader: (0)	I installed full exhaust (headers, catback, etc) on a lowered vette on jack stands and rhino ramps. It was a tight squeeze under the car but me and a friend were able to do it ourselves over a weekend... I'm sure you would have no problem doing this with a BMW.
	Appreciate 0 Quote

06-16-2010, 06:15 PM	#28
vasillalov Mad Linux Guru On The Loose 1195 Rep 5,455 Posts Drives: 2008 335i Sedan, 2023 M3 Join Date: Aug 2009 Location: Chicago, IL iTrader: (5) Garage List 2023 BMW M3 [0.00] 2008 335i E90 [8.00]	^^ Thanks for the encouragement. I'll get it started today! Vasil
	Appreciate 0 Quote

06-16-2010, 10:03 PM	#30
vasillalov Mad Linux Guru On The Loose 1195 Rep 5,455 Posts Drives: 2008 335i Sedan, 2023 M3 Join Date: Aug 2009 Location: Chicago, IL iTrader: (5) Garage List 2023 BMW M3 [0.00] 2008 335i E90 [8.00]	I just got a deal on the rhino ramps. My local Pepboys were selling the 12,000 lbs ones for $34.00, down from $55.00. I tried them by backing the car on to them and it looks like there is PLENTY of space and they will be perfect for future oil changes as well. I believe that once the front is lifted on jackstands, it will be rather easy to do the install. Vasil
	Appreciate 0 Quote

06-17-2010, 11:22 AM	#33
mkPOTO Mr. Nice Says Hello 649 Rep 16,662 Posts Drives: BMW M3 \| X5 xdrive 35i MSport Join Date: Dec 2008 Location: USA iTrader: (25) Garage List 2002 Lexus GS300 [0.00] 2008 BMW E92 M3 [5.58]	how did it go?
	Appreciate 0 Quote

06-17-2010, 12:07 PM	#37
ragingclue One cam is enough 136 Rep 6,801 Posts Drives: VF Join Date: Oct 2008 Location: mulletville iTrader: (1)	Do you mean inverted torx?
	Appreciate 0 Quote

06-17-2010, 12:50 PM	#39
mkPOTO Mr. Nice Says Hello 649 Rep 16,662 Posts Drives: BMW M3 \| X5 xdrive 35i MSport Join Date: Dec 2008 Location: USA iTrader: (25) Garage List 2002 Lexus GS300 [0.00] 2008 BMW E92 M3 [5.58]	gotcha, good luck
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search