[e93ro]

Where we might find map4 settings then ? map4 is autotuned ?

[Jeff@TopGearSolutions]

Originally Posted by e93ro

Where we might find map4 settings then ? map4 is autotuned ?

Map 4 is for the Beta Release of the Procede v5 Firmware 101. If your not familiar with it or not on the list, then you dont have it, YET.

It hasnt been released to the public.

Until then, map 3 is meth progresive mapping.

And Map 1 and map 2 are part of the useable adjustable settings.

To enable map 3 meth progressive mapping, you must have your failsafe in working order, and tested and find the flow of it. Please see post above.

All downloads available are www.vishnutuningforum.com You must have a log in name to download.

[e93ro]

I have #30 maps and v4 firmware and also I can see on my dashboard map4.
But software wise no setting I can find, I have some upgraded turbos, fbo and meth and considering map4 as my regular meth map

[Jeff@TopGearSolutions]

Originally Posted by e93ro

I have #30 maps and v4 firmware and also I can see on my dashboard map4.
But software wise no setting I can find, I have some upgraded turbos, fbo and meth and considering map4 as my regular meth map

Again, map 4 is progressive meth mapping. It combines the settings of map 2 when methanol is flowing, and settings of map 1 when methanol is not found to be flowing.

If you are using a labonte fail safe with your methanol kit, you need to read how much flow ouput your meth is via Debug Byte 7 logging channel.

A common number is "14" output.

You would then go to your user adjustable settings, and under "injection mode" input a value two less then your optimum output (i.e. Optimum flow is 14, set injection mode to 12). Some only go 1 number less, up to you so you could then do 13.

After you input that value that is found in debug byte 7 logging channel into injection mode, map 4 will work correctly.

What injection mode means is if meth is found to be flowing less then that value input, you will only be able to run map 1 settings for safety as methanol is not flowing enough.

If its flowing enough, greater then that value input, it will run map 2 settings, and your dashboard blinkers will illuminate showing you are on map 2 settings and methanol is flowing.

[OpenFlash]

Originally Posted by e93ro

I have #30 maps and v4 firmware and also I can see on my dashboard map4.
But software wise no setting I can find, I have some upgraded turbos, fbo and meth and considering map4 as my regular meth map

change your sig file

And +1 to what JPslick said.

[themyst]

Shiv, you should pay JP to be your minime.

[Jeff@TopGearSolutions]

Originally Posted by themyst

Shiv, you should pay JP to be your minime.

I could always use more income.... he knows where to find me.

[OpenFlash]

Originally Posted by themyst

Shiv, you should pay JP to be your minime.

Some would argue that he's not "evil" enough!

[themyst]

Originally Posted by shiv@vishnu

Some would argue that he's not "evil" enough!

That he isn't

[e93ro]

now it's clear for me, thanks JP !

[gimmes name]

Folks I can't seem to find a page that tells me how to update my maps. I don't even have the proceed software installed and can't find a link on where to get started. I have a proceed v4 with maps from June or July when I bought it. Not updated since. Yes I did do a search....


Any help?

[Jeff@TopGearSolutions]

Originally Posted by gimmes name

Folks I can't seem to find a page that tells me how to update my maps. I don't even have the proceed software installed and can't find a link on where to get started. I have a proceed v4 with maps from June or July when I bought it. Not updated since. Yes I did do a search....


Any help?

www.vishnutuningforum.com

Register, Log in... downloads!

http://www.vishnutuningforum.com/vie...aa98402c99d6ff Getting Started!

[gimmes name]

Originally Posted by JPSlick

www.vishnutuningforum.com

Register, Log in... downloads!

http://www.vishnutuningforum.com/vie...aa98402c99d6ff Getting Started!

thanks, got it all