Walnut Blasting - Michigan - MAY 3-4, 2014

SP3333D · 03-21-2014, 06:04 PM

Quote:

Originally Posted by J-Spec Dan

Quote:

Originally Posted by SP3333D

I just reread the OP and saw the bit about the oil filter housing leak. I have this problem and would like to have that done. I have an N52 tho, so not sure if that is the same part...

i dunno if the seal is the same part (probably is) as the N54 but the procedure is the same.

that's exactly what I was thinking.

justanothrone · 03-22-2014, 11:59 PM

Quote:

Originally Posted by J-Spec Dan

i prefer the 27th but i'm not getting walnut blasting. only rolled fenders, so my preference is pretty low compared to others

Whats the pricing to get the fenders rolled? I originally just wanted to have my intake blasted but I feel like it would save me so much time to get it all knocked out at the same time if I got my OFH gasket replaced, install a OCC, PCV delete and rolled my fenders as well.

halik008 · 03-24-2014, 12:08 PM

4/20 works for me

dsjr2006 · 03-26-2014, 06:39 PM

Any update on this? I PM'ed my email etc.

Turn In Concepts · 03-27-2014, 12:24 PM

Bump!

SP3333D · 03-27-2014, 01:32 PM

Quote:

Originally Posted by Turn In Concepts

Bump!

might want to drop this into the ohio page as well since toledo is so close...

Ovitrix335 · 03-28-2014, 12:08 AM

I need to roll my fenders too, tires are too wide...

J-Spec Dan · 03-28-2014, 11:11 AM

Quote:

Originally Posted by justanothrgi

Whats the pricing to get the fenders rolled? I originally just wanted to have my intake blasted but I feel like it would save me so much time to get it all knocked out at the same time if I got my OFH gasket replaced, install a OCC, PCV delete and rolled my fenders as well.

send a PM to "Turn In Concepts"

Agent11br · 03-28-2014, 12:14 PM

Quote:

Originally Posted by dsjr2006

Any update on this? I PM'ed my email etc.

Working out the date situation.

My wife is due in several weeks and we are wrapping up a home reno so life has been a bit chaotic, apologies.

elite. · 03-28-2014, 12:40 PM

Can we do something before or after the 20th? Having something else done on my car during that time.

Turn In Concepts · 03-28-2014, 05:54 PM

I have been emailing back and forth with Brandon and Stephen to try to get a definitive date picked out. Right now the 19th/20th is out due to Easter falling on that Sunday.

With that being said right now the preferred date would be May 3rd/4th. I am going to confirm that this will work for Stephen and if everything checks out we will set that date in stone and start accepting deposits.

-Kent

justanothrone · 03-28-2014, 07:45 PM

Quote:

Originally Posted by J-Spec Dan

send a PM to "Turn In Concepts"

Thanks. Just sent them a PM asking for quote on all the parts and labor.

elite. · 03-28-2014, 09:20 PM

Talked to Kent today. Coolest guy and totally helpful regarding my new (to me) e93. Looking forward to hopefully doing the WBing and being around some knowledgeable bimmer guys.

e90Mark · 03-28-2014, 09:26 PM

Quote:

Originally Posted by Turn In Concepts

I have been emailing back and forth with Brandon and Stephen to try to get a definitive date picked out. Right now the 19th/20th is out due to Easter falling on that Sunday.

With that being said right now the preferred date would be May 3rd/4th. I am going to confirm that this will work for Stephen and if everything checks out we will set that date in stone and start accepting deposits.

-Kent

Thanks for the update. Definitely would like a legit date.

J-Spec Dan · 03-28-2014, 09:45 PM

Quote:

Originally Posted by Turn In Concepts

I have been emailing back and forth with Brandon and Stephen to try to get a definitive date picked out. Right now the 19th/20th is out due to Easter falling on that Sunday.

With that being said right now the preferred date would be May 3rd/4th. I am going to confirm that this will work for Stephen and if everything checks out we will set that date in stone and start accepting deposits.

-Kent

awesome. btw, there's a cars & coffee in sterling heights at kart 2 kart every first saturday of the month. i'll probably head there for a little before stopping by Steve's if anyone wants to meet up then caravan.

also, the 4th is star wars day!

e90Mark · 03-28-2014, 09:47 PM

Quote:

Originally Posted by J-Spec Dan

awesome. btw, there's a cars & coffee in sterling heights at kart 2 kart every first saturday of the month. i'll probably head there for a little before stopping by Steve's if anyone wants to meet up then caravan.

also, the 4th is star wars day!

We're on the same side of town, no? I know a few others here are too. Would definitely be cool to be at K2K as a group, then caravan down.

J-Spec Dan · 03-28-2014, 09:58 PM

Quote:

Originally Posted by e90Mark

We're on the same side of town, no? I know a few others here are too. Would definitely be cool to be at K2K as a group, then caravan down.

nah, i'm on the wesside of oakland county, novi. if the walnut blasting turns out to be that same weekend, i'll setup a separate thread for the caravan to k2k

SP3333D · 03-28-2014, 11:34 PM

Quote:

Originally Posted by Turn In Concepts

I have been emailing back and forth with Brandon and Stephen to try to get a definitive date picked out. Right now the 19th/20th is out due to Easter falling on that Sunday.

With that being said right now the preferred date would be May 3rd/4th. I am going to confirm that this will work for Stephen and if everything checks out we will set that date in stone and start accepting deposits.

-Kent

This can work on my end. Gives me a little more time to get the shop setup and we might even be doing this in temps which are above freezing that way...

charrigan · 03-29-2014, 06:20 PM

4th is perfect for me

zivyn · 03-29-2014, 11:44 PM

3rd is good, 4th more difficult

Plus 3rd works for C&C like Dan said, unless they need to start super early in the AM

SP3333D · 03-31-2014, 11:15 AM

So are we settling on C&C followed by a cruise down on the 3rd?

elite. · 03-31-2014, 11:27 AM

3rd doesn't work for me. Will this possible be a 2day thing though so maybe walnut blasting on the 4th as well?

03-24-2014, 12:08 PM	#157
halik008 Private First Class 60 Rep 143 Posts Drives: e90 Join Date: Oct 2013 Location: United States iTrader: (0)	4/20 works for me
	Appreciate 0 Quote

03-26-2014, 06:39 PM	#158
dsjr2006 Captain 161 Rep 848 Posts Drives: '01 E39 540iA, '09 E90 M3 Join Date: May 2013 Location: Metro Detroit iTrader: (1) Garage List 2010 BMW 335i [0.00] 2001 BMW 540i [0.00]	Any update on this? I PM'ed my email etc. __________________ E90 M3 DCT LCI \| E90 LCI N54 M-Sport(retired) \| E90 Technical Docs download: http://j.mp/bmwe90docs *good read, very detailed.
	Appreciate 0 Quote

03-27-2014, 12:24 PM	#159
Turn In Concepts 10 Rep 172 Posts Drives: 335i Join Date: Jun 2010 Location: Cincinnati iTrader: (0)	Bump!
	Appreciate 0 Quote

03-28-2014, 12:08 AM	#161
Ovitrix335 Second Lieutenant 7 Rep 229 Posts Drives: Bmw 335i Join Date: Aug 2011 Location: Michigan iTrader: (11)	I need to roll my fenders too, tires are too wide...
	Appreciate 0 Quote

03-28-2014, 12:40 PM	#164
elite. First Lieutenant 37 Rep 348 Posts Drives: e93 Join Date: May 2013 Location: home iTrader: (2)	Can we do something before or after the 20th? Having something else done on my car during that time.
	Appreciate 0 Quote

03-28-2014, 05:54 PM	#165
Turn In Concepts 10 Rep 172 Posts Drives: 335i Join Date: Jun 2010 Location: Cincinnati iTrader: (0)	I have been emailing back and forth with Brandon and Stephen to try to get a definitive date picked out. Right now the 19th/20th is out due to Easter falling on that Sunday. With that being said right now the preferred date would be May 3rd/4th. I am going to confirm that this will work for Stephen and if everything checks out we will set that date in stone and start accepting deposits. -Kent
	Appreciate 0 Quote

03-28-2014, 09:20 PM	#167
elite. First Lieutenant 37 Rep 348 Posts Drives: e93 Join Date: May 2013 Location: home iTrader: (2)	Talked to Kent today. Coolest guy and totally helpful regarding my new (to me) e93. Looking forward to hopefully doing the WBing and being around some knowledgeable bimmer guys.
	Appreciate 0 Quote

03-29-2014, 06:20 PM	#173
charrigan Private First Class 8 Rep 154 Posts Drives: Fiat 500e, Audi Q5, 328d(soon) Join Date: Feb 2013 Location: Dexter, MI iTrader: (3)	4th is perfect for me
	Appreciate 0 Quote

03-29-2014, 11:44 PM	#174
zivyn First Lieutenant 29 Rep 378 Posts Drives: for enjoyment Join Date: Nov 2009 Location: West coast transplant iTrader: (13)	3rd is good, 4th more difficult Plus 3rd works for C&C like Dan said, unless they need to start super early in the AM
	Appreciate 0 Quote

03-31-2014, 11:15 AM	#175
SP3333D First Lieutenant 32 Rep 339 Posts Drives: E90 Join Date: Jul 2013 Location: Detroit iTrader: (1) Garage List 2007 BMW 328xi [10.00]	So are we settling on C&C followed by a cruise down on the 3rd?
	Appreciate 0 Quote

03-31-2014, 11:27 AM	#176
elite. First Lieutenant 37 Rep 348 Posts Drives: e93 Join Date: May 2013 Location: home iTrader: (2)	3rd doesn't work for me. Will this possible be a 2day thing though so maybe walnut blasting on the 4th as well?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search