Brake discs with anti corrosion paint.

Gear Head · 04-27-2016, 01:46 PM

I will be needing new discs and pads all round on my 325i soon.
Which suppliers offer discs with anti corrosion protection? Hate rusty hubs!

windymissile · 04-27-2016, 03:03 PM

I just painted my oem ones. My EBc ones haven't corroded yet (1 year).

WM

abeardo83 · 04-27-2016, 03:39 PM

Mtec brakes do ones with a coating on. Good value too

Gear Head · 04-27-2016, 09:02 PM

Looked mtec but they don't seem to offer plain discs.

OGM2LCI · 04-28-2016, 01:35 AM

Fitted Pagid on the front of mine nearly a year ago and still no corrosion, however the stories of Pagid may put you off

Fitted Eicher to the rear less than six months ago and within a week they were bright orange, hopeless, going to take them all off soon and coat them in something

MAN15H · 04-28-2016, 01:58 AM

I have the Zimmerman perforated discs with coat Z. Rears have been on the car since last December and the fronts since around July last year and the hubs are still the same as when I put them on no corrosion at all. I would recommend these discs.

http://www.otto-zimmermann.de/en/pro...sscheiben.html

Phil325i · 04-28-2016, 02:16 AM

Jurid are zinc coated and OEM...

Dann · 04-28-2016, 02:19 AM

I buy OEM and just paint all the hubs and edges with a decent etch primer (with high zinc content) before fitting.
After that, they never go rusty and still look OEM

AzRiz · 04-28-2016, 04:10 AM

Brembo do them, I fitted them on all 4 corners a few months ago. EuroCarParts supplied them, you'll see the charcoal-coloured "UV coating" on them in the pic.

jimbo666 · 04-28-2016, 08:46 AM

A coat of silver hammerite left to dry before installation on them has done me right so far.

Gear Head · 04-29-2016, 02:33 PM

Quote:

Originally Posted by MAN15H

I have the Zimmerman perforated discs with coat Z. Rears have been on the car since last December and the fronts since around July last year and the hubs are still the same as when I put them on no corrosion at all. I would recommend these discs.

http://www.otto-zimmermann.de/en/pro...sscheiben.html

Any idea of stockists?

Nickos · 04-30-2016, 12:58 AM

I painted mine with hammerite when I did the calipers, does the job nicely.

MAN15H · 04-30-2016, 03:36 PM

Quote:

Originally Posted by Gear Head

Any idea of stockists?

Grab the exact part number from the manufacturers website as they have an online catalogue then google that number you should see links for resellers on ebay, where I brought mine from, and Amazon.de etc...

Very reasonably priced and very good quality.

I've coupled mine with akebono pads for a killer combo as the pads produce very little brake dust and the stopping power is very good.

Gear Head · 05-01-2016, 12:47 PM

Cheers mate. What sort of money did you pay for the full set? Looking on Amazon and eBay, I'm looking at around £400!

MAN15H · 05-03-2016, 01:59 AM

Rears £159 for the pair

http://www.ebay.co.uk/itm/ZIMMERMANN...3D201258285299

Couldn't find the fronts on ebay at the mo but found them on the following site listed as £92 which I guess is per disc.

http://www.sparepartstore24.co.uk/1738754-zimmermann

Same shop lists the rears for £84 each.

http://www.sparepartstore24.co.uk/1738736-zimmermann

These are for the 335 so the ones for your car might be less just check the part numbers before you order anything.

04-27-2016, 01:46 PM	#1
Gear Head Private 7 Rep 59 Posts Drives: E92 325i M Sport Join Date: Sep 2015 Location: Kent iTrader: (0)	Brake discs with anti corrosion paint. I will be needing new discs and pads all round on my 325i soon. Which suppliers offer discs with anti corrosion protection? Hate rusty hubs!
	Appreciate 0 Tweet Quote

04-27-2016, 03:03 PM	#2
windymissile Major 68 Rep 1,431 Posts Drives: 335i M Sport Join Date: Apr 2013 Location: UK iTrader: (0)	I just painted my oem ones. My EBc ones haven't corroded yet (1 year). WM
	Appreciate 0 Quote

04-27-2016, 03:39 PM	#3
abeardo83 Captain 100 Rep 808 Posts Drives: E92 M3 Join Date: Nov 2015 Location: Cheshire iTrader: (2) Garage List 2008 BMW M3 [0.00]	Mtec brakes do ones with a coating on. Good value too
	Appreciate 0 Quote

04-27-2016, 09:02 PM	#4
Gear Head Private 7 Rep 59 Posts Drives: E92 325i M Sport Join Date: Sep 2015 Location: Kent iTrader: (0)	Looked mtec but they don't seem to offer plain discs.
	Appreciate 0 Quote

04-28-2016, 01:35 AM	#5
OGM2LCI Lieutenant 47 Rep 451 Posts Drives: E87 M2 LCI Join Date: Oct 2014 Location: UK iTrader: (0)	Fitted Pagid on the front of mine nearly a year ago and still no corrosion, however the stories of Pagid may put you off Fitted Eicher to the rear less than six months ago and within a week they were bright orange, hopeless, going to take them all off soon and coat them in something
	Appreciate 0 Quote

04-28-2016, 01:58 AM	#6
MAN15H Lieutenant 48 Rep 506 Posts Drives: G20 BMW 330e MSport Join Date: Jun 2013 Location: The Shires iTrader: (1)	I have the Zimmerman perforated discs with coat Z. Rears have been on the car since last December and the fronts since around July last year and the hubs are still the same as when I put them on no corrosion at all. I would recommend these discs. http://www.otto-zimmermann.de/en/pro...sscheiben.html
	Appreciate 0 Quote

04-28-2016, 02:16 AM	#7
Phil325i Brigadier General 646 Rep 3,229 Posts Drives: E92 325i MSport Coupe Join Date: Apr 2012 Location: UK South East iTrader: (1) Garage List 2009 BMW 325i Coupe [6.00]	Jurid are zinc coated and OEM... __________________ E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
	Appreciate 0 Quote

04-28-2016, 02:19 AM	#8
Dann Major 131 Rep 1,374 Posts Drives: E90 LCi 335i Join Date: Feb 2015 Location: Portsmouth, United Kingdom iTrader: (0)	I buy OEM and just paint all the hubs and edges with a decent etch primer (with high zinc content) before fitting. After that, they never go rusty and still look OEM __________________ My Individual E90 LCI 335i
	Appreciate 0 Quote

04-28-2016, 04:10 AM	#9
AzRiz Captain 143 Rep 940 Posts Drives: E92 M3 LE500 Join Date: Nov 2013 Location: London iTrader: (1)	Brembo do them, I fitted them on all 4 corners a few months ago. EuroCarParts supplied them, you'll see the charcoal-coloured "UV coating" on them in the pic.
	Appreciate 0 Quote

04-28-2016, 08:46 AM	#10
jimbo666 Private First Class 7 Rep 163 Posts Drives: E90 330d Join Date: Sep 2012 Location: Northampton iTrader: (1)	A coat of silver hammerite left to dry before installation on them has done me right so far.
	Appreciate 0 Quote

04-30-2016, 12:58 AM	#12
Nickos Private First Class 10 Rep 126 Posts Drives: e92 325d Join Date: Jan 2015 Location: United Kingdom iTrader: (0)	I painted mine with hammerite when I did the calipers, does the job nicely.
	Appreciate 0 Quote

05-01-2016, 12:47 PM	#14
Gear Head Private 7 Rep 59 Posts Drives: E92 325i M Sport Join Date: Sep 2015 Location: Kent iTrader: (0)	Cheers mate. What sort of money did you pay for the full set? Looking on Amazon and eBay, I'm looking at around £400!
	Appreciate 0 Quote

05-03-2016, 01:59 AM	#15
MAN15H Lieutenant 48 Rep 506 Posts Drives: G20 BMW 330e MSport Join Date: Jun 2013 Location: The Shires iTrader: (1)	Rears £159 for the pair http://www.ebay.co.uk/itm/ZIMMERMANN...3D201258285299 Couldn't find the fronts on ebay at the mo but found them on the following site listed as £92 which I guess is per disc. http://www.sparepartstore24.co.uk/1738754-zimmermann Same shop lists the rears for £84 each. http://www.sparepartstore24.co.uk/1738736-zimmermann These are for the 335 so the ones for your car might be less just check the part numbers before you order anything.
	Appreciate 0 Quote