Procede User Software v4.20 (now with Adjustable "Smoothness")

OpenFlash · 09-24-2010, 12:59 AM

Quote:

Originally Posted by JsTech

We already do. Actually, I've just made a final decision and bought Procede two days ago over the flash just because of greatest works of art you keep putting into it. You're willing to spend your time, listen to customers demands/requests and then use them along with your creative ideas as a V4 tune development to another step higher. Thanks man!

J-

Thanks man. It's a group effort over here so I can't take the credit

Jeff@TopGearSolutions · 09-24-2010, 01:03 AM

Quote:

Originally Posted by themyst

I love my Procede just the way it is. All I want for Christmas is CAN DME ignition timing readouts in the fuel gauge instead of the boost gauge! Can you make it happen perhaps a little early Shiv?

Good request... Live ignition without datalogging FTW.

themyst · 09-24-2010, 01:10 AM

Quote:

Originally Posted by JPSlick

Good request... Live ignition without datalogging FTW.

I was thinking boost/AFRs can be replaced by ignition/IATs for users like me and you JP.

0 on fuel gauge = 0 degrees, 1 on fuel gauge = 20 degrees, so that it is scaled in an easy-to-understand format.

IATs could be scaled 50-200 degrees F.

thwgw24 · 09-24-2010, 02:21 AM

Quote:

Originally Posted by themyst

I was thinking boost/AFRs can be replaced by ignition/IATs for users like me and you JP.

0 on fuel gauge = 0 degrees, 1 on fuel gauge = 20 degrees, so that it is scaled in an easy-to-understand format.

IATs could be scaled 50-200 degrees F.

boost gauage might be useless cus I think a lot of ppl that i know have the vent boost gauage already.

chiefsotos · 09-24-2010, 04:56 AM

Yes, inlet air temperature please... (if it is possible to appear in the digital little small monitor)

ehssan_alkhiyami · 09-24-2010, 05:17 AM

I'm speechless Shiv ,, great job guys ... wish you all the best ... talking about who doesn't appreciate Procede ??? , well basically the ppl who don't have one

DefactoM6 · 09-24-2010, 11:27 AM

Awesome update, Shiv! I already love the throttle response of the Procede, but I might adjust it on my 6MT to help mitigate my rather heavy right foot.

enrita · 09-24-2010, 11:50 AM

Giac like? set it at 50% :-)

chumley · 09-24-2010, 02:34 PM

Quote:

Originally Posted by shiv@vishnu

And we have made it so that you can adjust each map independently. So, in essense, you can make map1 a smoother, less responsive map (by lowering throttle response) and map2 more responsive (by leaving throttle response at 100%). And just change them on-the-fly depending on what you need/want

cheers,
shiv

Shiv - know this came up in another thread but I don't know if there was any final consensus.... Is there any way, or would you be willing to provide a way to map switch without the automatic adaptation reset? Maybe a default setting that could be set by the user?

As you continue to indulge us with more and more features and control, having the ability to switch maps without having the adaptation drive time would be great. Maybe a user setting in the software to set the default and an option in the command menu to force a reset of the current map?

I'm not in any way diminishing the value of the adaptation process, it's one of the reasons I went with the Procede, but many of us are not throwing race gas or changing hardware every week and wouldn't be negatively impacted by preserving the adaptation values.

335xiRT1 · 09-24-2010, 09:39 PM

Shiv
Are you able to mAke the PROcede so when shifting instead of having to be completely off the throttle to eliminate the bog, that if your foot is 20% on throttle it still does eliminates the bog.
Only because I notice when I shift fast from 2-3rd gear that I think my foot is still on the throttle a little bit and I get a bog sometimes.

AltecBX · 09-25-2010, 02:48 AM

This is very cool.
Shiv, can you finally add adaptation values to stay persistant while changing maps. What you've done with the Procede is basically add a Sports mode or M button for us non "M or Sport DCT" drivers.

It'll be great to program map 2 for a more aggressive mode without losing the learn value from Autotune. I suggested a while back to use the DTC button to relearn value if someone wanted too, since the DTC button doesn't get use to cahnge maps as often since you now use the steering wheel stalker. I know the DTC button pressed twice still changes maps, can you just add another click by pressing the DTC 3x and reseting the values to user default. So if we wanted to reset any adaptation or learn values from Autotune, we can just press the DTC 3x to reset all value in whatever map we desire.

Thanks for the ongoing support on the Procede!

ala012 · 09-25-2010, 06:49 AM

Quote:

Originally Posted by AltecBX

This is very cool.
Shiv, can you finally add adaptation values to stay persistant while changing maps.

+ 1

scottp999 · 09-25-2010, 10:33 AM

Took the new stuff out for a ride this morning. I'm not up on the command center or the new way of changing maps. Still enjoying the old way of doing things.

Great job on the updates!

Gonz37 · 09-30-2010, 04:51 PM

First day on Proced map 3, what can I say... I was scarred shitless on the highway! Now this is a bad boy tune!... what can I say.. Procede Rules!

themyst · 09-30-2010, 05:04 PM

Quote:

Originally Posted by scottp999

Took the new stuff out for a ride this morning. I'm not up on the command center or the new way of changing maps. Still enjoying the old way of doing things.

Great job on the updates!

+1 I like the DTC map switch. Don't remove it!

pcmike · 09-30-2010, 05:39 PM

Not trying to be a jerk, but is your mod list up to date? I thought map 3 was for methanol injection?

Quote:

Originally Posted by Gonz37

First day on Proced map 3, what can I say... I was scarred shitless on the highway! Now this is a bad boy tune!... what can I say.. Procede Rules!

ariman · 08-24-2018, 04:41 AM

Hi, I'm Ari from Finland and we have not much these programs in here and I bought my car last yr and there was Procede rev 3.5 4.20 but I never get any update my procede and not any more maps. I don't have much knowledge of parameters and tuning how could I make it good enough for me. This parameter you have posted here gives me some glue how to do it. Is it autotune (2) make all itself or do I should give some parameters here? I have 335i e93 n54 stock just only charge pipe changed. I really need some help with this issue! Ari from Finland. ariman@live.fi

09-24-2010, 04:56 AM	#27
chiefsotos First Lieutenant 51 Rep 300 Posts Drives: BMW 335 E93 Join Date: Jul 2008 Location: Greece iTrader: (0)	Yes, inlet air temperature please... (if it is possible to appear in the digital little small monitor)
	Appreciate 0

09-24-2010, 05:17 AM	#28
ehssan_alkhiyami I don't drive fast , i fly very low 11 Rep 358 Posts Drives: E60 M5 , F31 320D Xdrive Join Date: Sep 2008 Location: Baden Württemberg iTrader: (3)	I'm speechless Shiv ,, great job guys ... wish you all the best ... talking about who doesn't appreciate Procede ??? , well basically the ppl who don't have one
	Appreciate 0

09-24-2010, 11:27 AM	#29
DefactoM6 Sees the world the way it could be 49 Rep 761 Posts Drives: '88 M6, '02 Z8, '09 E92 335i Join Date: May 2010 Location: CT iTrader: (11)	Awesome update, Shiv! I already love the throttle response of the Procede, but I might adjust it on my 6MT to help mitigate my rather heavy right foot. __________________
	Appreciate 0

09-24-2010, 11:50 AM	#30
enrita Major General 163 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Giac like? set it at 50% :-) __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0

09-24-2010, 09:39 PM	#32
335xiRT1 Captain 48 Rep 693 Posts Drives: 2007 335i Join Date: Oct 2008 Location: long island iTrader: (14)	Shiv Are you able to mAke the PROcede so when shifting instead of having to be completely off the throttle to eliminate the bog, that if your foot is 20% on throttle it still does eliminates the bog. Only because I notice when I shift fast from 2-3rd gear that I think my foot is still on the throttle a little bit and I get a bog sometimes.
	Appreciate 0

09-25-2010, 02:48 AM	#33
AltecBX Colonel 350 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	This is very cool. Shiv, can you finally add adaptation values to stay persistant while changing maps. What you've done with the Procede is basically add a Sports mode or M button for us non "M or Sport DCT" drivers. It'll be great to program map 2 for a more aggressive mode without losing the learn value from Autotune. I suggested a while back to use the DTC button to relearn value if someone wanted too, since the DTC button doesn't get use to cahnge maps as often since you now use the steering wheel stalker. I know the DTC button pressed twice still changes maps, can you just add another click by pressing the DTC 3x and reseting the values to user default. So if we wanted to reset any adaptation or learn values from Autotune, we can just press the DTC 3x to reset all value in whatever map we desire. Thanks for the ongoing support on the Procede! __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0

09-25-2010, 10:33 AM	#35
scottp999 Brigadier General 138 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	Took the new stuff out for a ride this morning. I'm not up on the command center or the new way of changing maps. Still enjoying the old way of doing things. Great job on the updates!
	Appreciate 0

09-30-2010, 04:51 PM	#36
Gonz37 New Member 2 Rep 19 Posts Drives: BMW 335xi Join Date: Jan 2010 Location: Peru iTrader: (0) Garage List 2008 335XI [0.00]	New to Proced First day on Proced map 3, what can I say... I was scarred shitless on the highway! Now this is a bad boy tune!... what can I say.. Procede Rules! __________________ 2008 335XI, Auto, Nav, Wint. Packg. Mods: 18",Perform.Intercooler, AFE Dual Cone Air Intake, Borla Compleate Exhaust(No Cats), H&R Coilover Kit, Pocede v4)
	Appreciate 0

08-24-2018, 04:41 AM	#39
ariman New Member 0 Rep 6 Posts Drives: 335i m-sport e93 n54 2008 Join Date: Aug 2018 Location: Finland iTrader: (0)	Hi, I'm Ari from Finland and we have not much these programs in here and I bought my car last yr and there was Procede rev 3.5 4.20 but I never get any update my procede and not any more maps. I don't have much knowledge of parameters and tuning how could I make it good enough for me. This parameter you have posted here gives me some glue how to do it. Is it autotune (2) make all itself or do I should give some parameters here? I have 335i e93 n54 stock just only charge pipe changed. I really need some help with this issue! Ari from Finland. ariman@live.fi
	Appreciate 0