cp-e Standback IN DASH boost gauge...

Jeff@TopGearSolutions · 07-19-2010, 03:34 PM

Quote:

Originally Posted by joyride

Speedo is better then some vague Fuel gauge, at least the speedo has scale.

This talk about patents, you have no idea what they are patenting. Maybe they are not just hacking into a patented technology, I.E, the CAN-bus, which is owned by Bosch (who is the REAL pioneer) and requires licensing to use. If they don't have licensing, i would suggest at least looking into that. Equity management co's love going after people like this, and penalties are pretty stiff for after the fact usage. Even as far as court ordered recalls and destruction of products that are not licensed. It's fun walking around SEMA and documenting who a serious discussion needs to be had with in regards to licensing.

Well what happens when I run 17 PSI? this gauge becomes obsolete LOL

e93WhiteonRed · 07-19-2010, 03:52 PM

I stand Corrected... I had had hotcakes then. Especially Blueberry hotcakes.

joyride · 07-19-2010, 03:55 PM

Quote:

Originally Posted by JPSlick

Well what happens when I run 17 PSI? this gauge becomes obsolete LOL

Then you should be paying attention to driving rather then reading your gauges, but i get it, both of these are super gimmicky IMO. I doubt anyone serious to run that high of boost would rely on a hacked gauge for vital information.

AltecBX · 07-19-2010, 04:16 PM

I just believe CP-e rushed out the video because of the in-dash Vishnu came out with. They didn't want to feel the public believe they copied from them. At end of the day, we the users are getting the same feature on different gauges. Plain & simple.

WhereItsAt · 07-19-2010, 04:19 PM

two words: Prior Art.

Tiago@VRSF · 07-19-2010, 04:22 PM

Quote:

Originally Posted by joyride

Speedo is better then some vague Fuel gauge, at least the speedo has scale.

This talk about patents, you have no idea what they are patenting. Maybe they are not just hacking into a patented technology, I.E, the CAN-bus, which is owned by Bosch (who is the REAL pioneer) and requires licensing to use. If they don't have licensing, i would suggest at least looking into that. Equity management co's love going after people like this, and penalties are pretty stiff for after the fact usage. Even as far as court ordered recalls and destruction of products that are not licensed. It's fun walking around SEMA and documenting who a serious discussion needs to be had with in regards to licensing.

The fuel gauge is scaled and isn't vague. 0 is 0 boost, quarter is 5, half is 10, 3/4 is 15 and full is 20.

Belarus · 07-19-2010, 04:33 PM

Quote:

Originally Posted by JPSlick

Well what happens when I run 17 PSI? this gauge becomes obsolete LOL

Maybe not on Metric SPEEDOs since it's in KM/h and scale goes up to 260Km/h = 26 PSI

Belarus · 07-19-2010, 04:34 PM

Quote:

Originally Posted by tvieira24

The fuel gauge is scaled and isn't vague. 0 is 0 boost, quarter is 5, half is 10, 3/4 is 15 and full is 20.

Tiago@VRSF · 07-19-2010, 04:47 PM

Quote:

Originally Posted by Belarus

Hater

Belarus · 07-19-2010, 05:02 PM

Quote:

Originally Posted by tvieira24

Hater

LOL... just being honest

alextremo · 07-19-2010, 08:40 PM

Quote:

Originally Posted by boom

I like the speedo as it's easier to see exactly what you're boost is. The fuel gauge is smaller and has less resolution. As for needing to know the speed, I would respectfully disagree. What's the difference btw knowing you're going 110 vs 130 vs 100. You're likely going to jail either way and with the tach and what gear you're in you'll have an idea... That and by how fast your swishing by traffic...

Not to pile on, but for those with 6AT the dash doesn't display what gear you're in unless you drive in manual mode. Tach can't be used to estimate speed in this case.

badass335 · 07-20-2010, 12:45 PM

Not sure if you guys know but how will this apply to canadian cars etc? We dont have mph on our dash. Only kph. So when are going to guess at what psi we're at?

07-19-2010, 03:52 PM	#68
e93WhiteonRed Second Lieutenant 19 Rep 267 Posts Drives: 2007 E93 Alpine white with Red Join Date: Jul 2010 Location: Reston, Virginia iTrader: (3) Garage List 2007 335I E93 [0.00]	I stand Corrected... I had had hotcakes then. Especially Blueberry hotcakes. __________________ 2007 335I E93 sport package Alpine White. BMS DCI, PROcede V4, ACT street clutch, Michelin Pilot Sport A/S Plus and BT Tool. Pending install of Raceland Downpipes.
	Appreciate 0 Quote

07-19-2010, 04:16 PM	#70
AltecBX Colonel 350 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	I just believe CP-e rushed out the video because of the in-dash Vishnu came out with. They didn't want to feel the public believe they copied from them. At end of the day, we the users are getting the same feature on different gauges. Plain & simple. __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

07-19-2010, 04:19 PM	#71
WhereItsAt Constantly Learning 69 Rep 200 Posts Drives: Four Wheels Join Date: Jan 2008 Location: Houston iTrader: (0)	two words: Prior Art.
	Appreciate 0 Quote

07-20-2010, 12:45 PM	#78
badass335 Lieutenant Colonel 119 Rep 1,948 Posts Drives: 2017 540i Xdrive Join Date: Jul 2007 Location: Surrey, BC iTrader: (10)	Not sure if you guys know but how will this apply to canadian cars etc? We dont have mph on our dash. Only kph. So when are going to guess at what psi we're at?
	Appreciate 0 Quote