DIY - Euro Switch

Mr. 5 · 01-16-2008, 01:38 PM

hmm.
Nobody posted the part number for this?

thekurgan · 01-16-2008, 01:40 PM

Quote:

Originally Posted by Mr. 5

hmm.
Nobody posted the part number for this?

Sorry, Bro. Here you go:

61 31 6 932 796

I got my part from Crown Auto Parts, $63 shipped, 5 minute installation.

Skiddy_ys · 01-16-2008, 01:42 PM

Depends on your vehicle. If you have Xenon, Rain Sensor, etc.

Check here for Part No.
http://www.realoem.com/bmw/showparts...39&hg=61&fg=35

Mr. 5 · 01-16-2008, 02:20 PM

Quote:

Originally Posted by thekurgan

Sorry, Bro. Here you go:

61 31 6 932 796

I got my part from Crown Auto Parts, $63 shipped, 5 minute installation.

That's what I thought.
I went to the real oem page and found that part number, but I wanted to be sure. I do have Xenons, fogs and rain sensor.

USA is 61316938864
Europe 61316932796

I could have really used the rear fogs today. It was very thick this morning.
Thanks!

Skiddy_ys · 01-16-2008, 02:32 PM

Europe 61316932796 is the one you need

EHDEN · 01-20-2008, 10:30 PM

Quote:

Originally Posted by Skiddy_ys

Europe 61316932796 is the one you need

+1

phattbam · 01-20-2008, 11:18 PM

so..when we dont use the rear fogs with this euro switch.... the adaptive brake lights function normally right??

lovemyBimmer · 01-21-2008, 12:01 AM

^^yes

EHDEN · 01-25-2008, 11:54 AM

Quote:

Originally Posted by phattbam

so..when we dont use the rear fogs with this euro switch.... the adaptive brake lights function normally right??

+1 that's correct.

Majikthese42 · 01-25-2008, 02:25 PM

BTW, if you try compressing a non-recessable original switch enough it looks like it can break!

DonCorleone · 02-09-2008, 09:28 PM

finally got a chance to install this mod....instructions worked beautifully except for one thing. getting the piece to fit flush with the trim. it wasnt looking like it was fitting, kinda was just sitting there not clipped on and after looking at it, you have to line up the clips and take the screwdriver and push the clip up and you ll hear it snap into place, dit it for all 4 clips, now its a tight fit, perfect, looks great, nice write up, thanks

rpcannibus · 02-11-2008, 06:46 PM

My switch came in today, can't wait to get it installed!!! Good write up.

Chunga · 02-11-2008, 06:51 PM

Quote:

Originally Posted by thekurgan

I just did this mod in 5 minutes after the part arrived. I did have one question though, on my 07 e90, my original light switch had a recess feature where you could push the button into the housing, so your knee wouldn't hit it I guess. This part with the rear fog light switch does not have that feature.

Anyone else notice this or did I get a defective part?

You did not. I tryed in my 08 model It cant do it anymore.

EHDEN · 02-13-2008, 12:05 AM

Quote:

Originally Posted by DonCorleone

finally got a chance to install this mod....instructions worked beautifully except for one thing. getting the piece to fit flush with the trim. it wasnt looking like it was fitting, kinda was just sitting there not clipped on and after looking at it, you have to line up the clips and take the screwdriver and push the clip up and you ll hear it snap into place, dit it for all 4 clips, now its a tight fit, perfect, looks great, nice write up, thanks

thanks! I am glad I can share my experience...

tron1043 · 02-16-2008, 10:22 AM

Thank you. I would've been stuck at taking the bottom piece that's connected by the three pins.

mp0i · 02-16-2008, 01:36 PM

Picked up the euro switch last week from Tischer ($60 on sale plus shipping) and put it in this morning. I can attest this is really easy to do. Although to be honest, I initially had visions of scratching the trim, breaking little plastic parts etc.. That is why I waited until today to do it. I wanted to make sure I was not in a hurry and could take my time. Even then it only took 10 minutes. The bottom light switch piece took a little patience and controlled pulling to loosen it up and pull it off the pins. Thanks for the info guys.

am_ver · 02-27-2008, 12:52 PM

I did the DIY. Pretty easy (thanks to the great instructions). After installing it and on my first ride, I pressed the light switch knob to see if it recessed as others have mentioned, and the whole new unit that I ordered fell inside the hole. I opened the trim again and pushed the part back into the trim... however it feels that it can fall inside if I press it with any slight force. Any else face this problem? fix?

ps: interesting thing to mention, I completed the DIY and then tried to start the car.. door was open, and I pressed the clutch and start button... nothing.. so I am like, maybe car wouldn't start with door open... try again.. nothing.. I am like DANG.. looks like major electrical issue... gonna cost me a lot ... then I realize, the key is not in the ignition... hahaa....phew!!

BES335xi · 04-07-2008, 02:05 AM

just do itttt you're selvesssssss

E90SLAM · 04-07-2008, 09:50 AM

Quote:

Originally Posted by am_ver

I did the DIY. Pretty easy (thanks to the great instructions). After installing it and on my first ride, I pressed the light switch knob to see if it recessed as others have mentioned, and the whole new unit that I ordered fell inside the hole. I opened the trim again and pushed the part back into the trim... however it feels that it can fall inside if I press it with any slight force. Any else face this problem? fix?

ps: interesting thing to mention, I completed the DIY and then tried to start the car.. door was open, and I pressed the clutch and start button... nothing.. so I am like, maybe car wouldn't start with door open... try again.. nothing.. I am like DANG.. looks like major electrical issue... gonna cost me a lot ... then I realize, the key is not in the ignition... hahaa....phew!!

You mean the whole switch fell inside the trim???
when you put the modded switch back to the trim....use a little pressure and make sure all you hear four "clicks" when the clip secure with the bottom trim.....that's it...

and as for the start issue....i think u need a few drinks...

carrabassett786 · 07-05-2008, 02:35 PM

a nice 90 second mod

Tagg67 · 10-31-2008, 09:23 PM

This was the easiest upgrade I have ever done. It really took 5 minutes to install and it works great. I could see the lights at 6pm when I took the photos (see my other post) of the rear and inside of the car.
I am so glad I found this forum when I did. If you have questions on where to buy, just do a search like I did. I got the switch for $56.95 plus $8 dollars shipping. I ordered from Crownauto.com.

Thanks to everyone for the great info here in the DIY.

Tagg67

rmorin49 · 11-01-2008, 09:44 PM

I installed the Euro switch today in my 09 E93. The 09 US OEM switch has chrome trim on the piece that you actually turn. Does anyone know if this can be removed from the switch?

01-16-2008, 01:38 PM	#23
Mr. 5 Modder Raider 840 Rep 8,633 Posts Drives: M3 Join Date: Apr 2007 Location: Surf City, HB iTrader: (31) Garage List 2007 e90 335i [8.00]	hmm. Nobody posted the part number for this? __________________ e36 M3 Coupe, e36 325i Sedan e90 335i--SOLD Best 60-130-------------9.15 Seconds------------------WWW.MR5RACING.COM
	Appreciate 0 Quote

01-16-2008, 01:42 PM	#25
Skiddy_ys New Member 0 Rep 22 Posts Drives: 2007 335i Convertible Join Date: Nov 2007 Location: San Francisco Bay Area iTrader: (0)	Depends on your vehicle. If you have Xenon, Rain Sensor, etc. Check here for Part No. http://www.realoem.com/bmw/showparts...39&hg=61&fg=35 __________________ 335 Convertible \| Space Gray \| Creme/Beige \| Dark Burl \| Step \| Sport \| Premium \| Cold Weather \| Comfort \| PDC \| 6FL (iPod) ED Pickup: August 21, 2007, ED Drop-off: September 6, 2007, Redelivery: October 26, 2007
	Appreciate 0 Quote

01-16-2008, 02:32 PM	#27
Skiddy_ys New Member 0 Rep 22 Posts Drives: 2007 335i Convertible Join Date: Nov 2007 Location: San Francisco Bay Area iTrader: (0)	Europe 61316932796 is the one you need __________________ 335 Convertible \| Space Gray \| Creme/Beige \| Dark Burl \| Step \| Sport \| Premium \| Cold Weather \| Comfort \| PDC \| 6FL (iPod) ED Pickup: August 21, 2007, ED Drop-off: September 6, 2007, Redelivery: October 26, 2007
	Appreciate 0 Quote

01-20-2008, 11:18 PM	#29
phattbam Major General 182 Rep 5,817 Posts Drives: '17 Protonic Blue i3 REx Join Date: Sep 2007 Location: sf area iTrader: (21)	so..when we dont use the rear fogs with this euro switch.... the adaptive brake lights function normally right??
	Appreciate 0 Quote

01-21-2008, 12:01 AM	#30
lovemyBimmer Captain 10 Rep 675 Posts Drives: '07 328i Join Date: Apr 2007 Location: Riverside, CA iTrader: (5)	^^yes
	Appreciate 0 Quote

01-25-2008, 02:25 PM	#32
Majikthese42 Philosopher-king 20 Rep 1,113 Posts Drives: 2008 E91 Join Date: Apr 2005 Location: People's Republic of New Jersey iTrader: (0)	BTW, if you try compressing a non-recessable original switch enough it looks like it can break! __________________ E91 6MT Alpine, Terra, Xenons, ZSP, ZCW, ZPP, PDC, CA, alarm, M shifter and M brake handle, Euro rear fog light switch, Euro aspheric mirrors, rear power outlets, Garmin nüvi custom cupholder mount, Lidatek, V-1 built-in remote display, tire pump, jack, floor mats.
	Appreciate 0 Quote

02-09-2008, 09:28 PM	#33
DonCorleone Private 7 Rep 55 Posts Drives: 2007 328xi Join Date: Sep 2007 Location: Pittsburgh, PA iTrader: (2)	finally got a chance to install this mod....instructions worked beautifully except for one thing. getting the piece to fit flush with the trim. it wasnt looking like it was fitting, kinda was just sitting there not clipped on and after looking at it, you have to line up the clips and take the screwdriver and push the clip up and you ll hear it snap into place, dit it for all 4 clips, now its a tight fit, perfect, looks great, nice write up, thanks
	Appreciate 0 Quote

02-11-2008, 06:46 PM	#34
rpcannibus Private First Class 2 Rep 108 Posts Drives: 08 e92 335i w/Dinan Stage 2 Join Date: Oct 2007 Location: Tarzana, CA iTrader: (2)	My switch came in today, can't wait to get it installed!!! Good write up. __________________ 2008 BMW 335I Coupe\| Jet Black on Coral Red/black Dakota Leather \| 6 Speed Manual \| Sport Package \| Active Steering \| Comfort Access \| Front Heated Seats \| Park Distance Control \| ETA November 12th. \| Arrived on November 13th 2007. \| Lemoned February 12th 2010 Dinan Stage 2 Performance Engine Software. \| Vorsteiner VRS Aero Boot Lid. \| Vorsteiner V-35 Hood \| H&R Sport Springs \| H&R Rear Sway Bar
	Appreciate 0 Quote

02-16-2008, 10:22 AM	#37
tron1043 First Lieutenant 92 Rep 381 Posts Drives: G30 540i xDrive Join Date: Aug 2005 Location: Metro-Detroit iTrader: (1) Garage List 2013 328i M-Sport [0.00] 2012 F30 335i [0.00]	Thank you. I would've been stuck at taking the bottom piece that's connected by the three pins. __________________
	Appreciate 0 Quote

02-16-2008, 01:36 PM	#38
mp0i RSM, CA 6 Rep 38 Posts Drives: 2014 328d Join Date: Oct 2005 Location: So. Cal. iTrader: (1)	Picked up the euro switch last week from Tischer ($60 on sale plus shipping) and put it in this morning. I can attest this is really easy to do. Although to be honest, I initially had visions of scratching the trim, breaking little plastic parts etc.. That is why I waited until today to do it. I wanted to make sure I was not in a hurry and could take my time. Even then it only took 10 minutes. The bottom light switch piece took a little patience and controlled pulling to loosen it up and pull it off the pins. Thanks for the info guys. __________________ mp0i Last edited by mp0i; 02-16-2008 at 01:41 PM.. Reason: added DIY ratings
	Appreciate 0 Quote

02-27-2008, 12:52 PM	#39
am_ver Lieutenant 40 Rep 587 Posts Drives: Audi A6 Join Date: Sep 2005 Location: SF Bay Area (Woodside) iTrader: (2)	I did the DIY. Pretty easy (thanks to the great instructions). After installing it and on my first ride, I pressed the light switch knob to see if it recessed as others have mentioned, and the whole new unit that I ordered fell inside the hole. I opened the trim again and pushed the part back into the trim... however it feels that it can fall inside if I press it with any slight force. Any else face this problem? fix? ps: interesting thing to mention, I completed the DIY and then tried to start the car.. door was open, and I pressed the clutch and start button... nothing.. so I am like, maybe car wouldn't start with door open... try again.. nothing.. I am like DANG.. looks like major electrical issue... gonna cost me a lot ... then I realize, the key is not in the ignition... hahaa....phew!! __________________ 2006 A6 3.2 Quattro 2008 e93 335i, 6sp MT, Montego Blue, Saddle, Burl, ZSP, Bluetooth, iDrive, PDC, V1+CD 2007 e92 335i coupe, 6sp MT, Montego, Beige, ZPP, iDrive, PDC 2006 e90 325i, ZPP, iDrive, Arctic, Xenon
	Appreciate 0 Quote

04-07-2008, 02:05 AM	#40
BES335xi Colonel 94 Rep 2,132 Posts Drives: FBO+ N54xi Join Date: Mar 2008 Location: Queens, NYC iTrader: (4) Garage List 03/07 E90 335xi [1.00]	just do itttt you're selvesssssss __________________ JB4+usb \| P3 Vent Boost Gauge v2 \| BMS OCC \| BMS DCI \| AMS FMIC \| AR xi CL DP's \| BT Tool \| Edibias/NCSExpert/INPA BMW Coding \| Cyba Quad Exhaust tips \| M-Tech Rear & M3 Front Bumper \| Red Cyba Air Scoops \| Blacklines \| Vinyl Overlays \| ACS Roof Spoiler \| Matte Black Grilles \| LED Side Mirrors \| Rear Euro Fogs \| etc.. .
	Appreciate 0 Quote

07-05-2008, 02:35 PM	#42
carrabassett786 Lieutenant 14 Rep 508 Posts Drives: 11 328i Join Date: Dec 2006 Location: Ponte Vedra Beach, FL iTrader: (0)	a nice 90 second mod __________________ E90 328i Space Gray/Chestnut ZMP 2MF ZP2 ZV2 ZCV ZCW-washers HK SAT 3rd Pedal ED 2011.10.10 E90 325xi BSM/Terra ZSP ZPP ZCW Adaptive Xenons SAT 3rd pedal Gone E53 X5 3.0i Black Sapphire/Truffle ZPP ZCW ZRC Xenon Nav
	Appreciate 0 Quote

10-31-2008, 09:23 PM	#43
Tagg67 BMW4Life 37 Rep 233 Posts Drives: 2018 F30 340i X-Drive Join Date: Jul 2008 Location: Florida iTrader: (5) Garage List 2008 328i Sedan [0.00]	Installing Euro Rear Fog Light Switch This was the easiest upgrade I have ever done. It really took 5 minutes to install and it works great. I could see the lights at 6pm when I took the photos (see my other post) of the rear and inside of the car. I am so glad I found this forum when I did. If you have questions on where to buy, just do a search like I did. I got the switch for $56.95 plus $8 dollars shipping. I ordered from Crownauto.com. Thanks to everyone for the great info here in the DIY. Tagg67
	Appreciate 0 Quote

11-01-2008, 09:44 PM	#44
rmorin49 Major 58 Rep 1,162 Posts Drives: 11 335d/10 Z4 s30i Join Date: Nov 2006 Location: Hagerstown, MD iTrader: (1)	I installed the Euro switch today in my 09 E93. The 09 US OEM switch has chrome trim on the piece that you actually turn. Does anyone know if this can be removed from the switch? __________________ Colonel (Retired), US Army/Hagerstown, MD 2016 518ixdrive/MSport AW/Ivory White ED-01-10 2010 Z4s30i AW/Beige/Burl/ 6MT/SP/PP/CWP/NAV/ipod/USB/CA (retired) 2011 335d BS/Oyster/PP/CWP/NAV/ipod/USB(Daily Driver) 30+ mpg(retired)
	Appreciate 0 Quote