[CYL]

LCI tail light is much better.
I am in for the reverse light, better get it and swap it once I have got my LCI tail light.

[donR]

Originally Posted by CYL

LCI tail light is much better.
I am in for the reverse light, better get it and swap it once I have got my LCI tail light.

Ok great, please PM me your email & selection, ie., Option 3 LCI special type.

So far:

donR
R32GOJIRA
EB89
Hvyarms
CYL
CashedUpBogan

Maybe:
iliketurtl3s?
Trev88?

[donR]

I'm going to finalise the order and get the shipping cost on all the lights so let me know if anyone else wants in.

[CashedUpBogan]

Count me in. I have a pre LCI E93 with LCI lights, ao I'd guess I need the LCI bulb?

[donR]

Originally Posted by CashedUpBogan

Count me in. I have a pre LCI E93 with LCI lights, ao I'd guess I need the LCI bulb?

Yep, you would need the special option 3 type:



Please PM me your car model, option and email contact. thanks.

[DR-JEKL]

Are these PNP Don?

[donR]

I'm assured they are, but obviously you need to remove the OEM bulb and socket and put this in place then plug in to the existing wiring harness. I will get confirmation on plug details to confirm and maybe someone can double check.

_ink has also done his using the Lux equivalent which look virtually identical so maybe he can also enlighten us.

If there is a problem which I don't think there will be we will send them back for a refund.

When they arrive we can test on some ones E9x LCI before sending everyone's out

[donR]

Originally Posted by DR-JEKL

Are these PNP Don?

I was able to confirm details.

The Option 3 for LCI E9x is definitely plug and play so let me know if you're in.

The LCI OEM reverse light is shown below, You can see the arrows pointing to the spade connector tab. The two OEM spade connectors are removed from here then plugged into the new connector tabs on the LED cables.



This photo is the new reverse LEDs & plate screwed into place having replaced the OEM light bulb and socket plate shown above using the two OEM screws:
Note scale is approx double

[DR-JEKL]

Cheers Don

So just unbolt the taillamp and unscrew the old and screw in the replacements?

If so please jot me down for a set (dont really need em, but what the heck!)

I must admit I havent investigated this wasn't sure if it involved something crazy like putting the lamp in the oven to melt the glue and splitting the lense apart etc?

Since you're a VAG guy and a LED guy, do you have any LED upgrades for a 2012 VW passat? I was hoping for the driving lamp/fog light and interior kit plate lamps etc?

[donR]

I am still working on the interior kit. I am a bit fussy but almost there and I will let you guys know.

Yep the install for the LCI reverse light seems very straightforward so I'll put you down for one.

I will check on the 2012 Passat for you. What model (e.g, 3c2) and engine type is the passat? Can you please PM me your email.

Thanks

[donR]

Still people coming on board for the group buy so let me know if anyone else wants in.

donR
R32GOJIRA
EB89
Hvyarms
CYL
CashedUpBogan
DR-JEKL
Socket
Pyro330d
Trev88

Maybe:
iliketurtl3s?

[Socket]

Originally Posted by donR

Still people coming on board for the group buy so let me know if anyone else wants in.

donR
R32GOJIRA
EB89
Hvyarms
CYL
CashedUpBogan
DR-JEKL

Maybe:
iliketurtl3s?
Trev88?

Yep put me down for a set Don
Im running Depot LCI tails... so I think im option 3?

[Pyro335]

Im down for a set of LCI reverse lights

[Trev88]

Is the E90 lci lights easy to change? Any errors?

[donR]

Originally Posted by Trev88

Is the E90 lci lights easy to change? Any errors?

It looks to me like the E90 LCi is option 2, see #5 at:

http://bmwfans.info/parts-catalog/E9...ng/rear_light/


If you pop the boot on your car and remove the flap where the reverse light is you should be able to unclick the assembly, take it out, remove the OEM reverse bulb like the one shown below and put in the new LED one. Should take less than 5 minutes. As mentioned I've tested on my E91 and no errors. It is only the E92 LCI that has two extra screws to take out and comes with base plate, though I wouldn't call that one difficult either.

[Socket]

When r u placing the order and organising delivery Don?
How do we get the cash to you mate?

[donR]

I'm just wanting on the shipping quote for all the parts then I will divvy it up and email everyone instructions. EFT would be best.

I have quite a few joining in over at ozaudi
http://www.ozaudi.com/forums/car-par...oup-buy-2.html

So shipping should end up being quite low between all of us

[Socket]

Originally Posted by donR

I'm just wanting on the shipping quote for all the parts then I will divvy it up and email everyone instructions. EFT would be best.

I have quite a few joining in over at ozaudi
http://www.ozaudi.com/forums/car-par...oup-buy-2.html

So shipping should end up being quite low between all of us

sweet

[Trev88]

I'm in!

[donR]

Ok cool PM me your email when you get a chance.

[Trev88]

Payment sent

[donR]

I've sent payment details to everyone. Let me know if anyone didn't receive the info.

I've been told parts will be ready next week if I can make payment ASAP.