New feature: Procede IN-DASH Boost Gauge (now available)

supracg · 07-16-2010, 06:21 PM

^ that would make it a little more confusing, then each of the dashes would represent boost amounts in the decimals rather than just 1, 2, 3 psi etc

OpenFlash · 07-16-2010, 07:23 PM

Quote:

Originally Posted by supracg

^ that would make it a little more confusing, then each of the dashes would represent boost amounts in the decimals rather than just 1, 2, 3 psi etc

+1
One idea we entertained was to represent boost in terms of bar (1bar=14.5psi). So full the full max reading ("1") would indicate 1 bar of boost. The only problem is that many of us run more than 1bar/14.5psi of boost when running on meth/race gas. And while the gauge needles can point much higher tan the max printed value, it will be difficult to quantify actual boost when the needle is floating around in an unprinted area.

Shiv

AltecBX · 07-16-2010, 07:37 PM

Shiv, what do you say at the last bit in the video. "For the wind"?

Clap135 · 07-16-2010, 07:38 PM

I don't think cpe intentions were to tell vishnu to fuck off lol. I think they have a patent date as proof that they are not copying what the procede is doing, but thats just my opinion

Tiago@VRSF · 07-16-2010, 07:43 PM

Quote:

Originally Posted by Clap135

I don't think cpe intentions were to tell vishnu to fuck off lol. I think they have a patent date as proof that they are not copying what the procede is doing, but thats just my opinion

Yeah the dudes at cpe are good folks, I'm sure there wasn't any harm intended.

OpenFlash · 07-16-2010, 07:43 PM

Quote:

Originally Posted by Clap135

I don't think cpe intentions were to tell vishnu to fuck off lol. I think they have a patent date as proof that they are not copying what the procede is doing, but thats just my opinion

Funny how everyone is going with CAN integration these days

Shiv

RiXst3r · 07-16-2010, 07:44 PM

Quote:

Originally Posted by Clap135

I don't think cpe intentions were to tell vishnu to fuck off lol. I think they have a patent date as proof that they are not copying what the procede is doing, but thats just my opinion

I had conversations over the phone with shiv and adrian back in spring of 2009 where they were telling me about this feature coming down the pipe... I don't think there is any doubt that vishnu was the first with this approach to canbus based gauge takeover from a piggyback.

Clap135 · 07-16-2010, 07:57 PM

who cares? lol
I am simply talking about guages moving to show boost.

We all know vishnu was the first with CAN, the others followed/copied.

Back on topic, im really shocked how responsive this fuel guage thing is. Just reving my car in nuetral the thing ramped up to 8psi in a heart beat and shot right back down to zero when the bov went off. Impressive

flipdsm · 07-16-2010, 07:59 PM

In-Dash working perfectly on my car

jpsimon · 07-16-2010, 08:00 PM

+1, this works so well!

flipdsm · 07-16-2010, 08:03 PM

Ever thought of a digital boost gauge? Like have it read boost where it says current miles until empty, average mpg, etc?

themyst · 07-16-2010, 08:04 PM

my god I go stock for a few days and it feels like Christmas all over again. Since I have a boost gauge already the feature is not useful to me just yet, but when meth flow, IATs, et. al are ready for this, this will be a SICK feature!

alextremo · 07-16-2010, 08:11 PM

Quote:

Originally Posted by AltecBX

Shiv, what do you say at the last bit in the video. "For the wind"?

Yup - "for the wind" is the command that deactivates the PROcede's voice activated throttle control

AltecBX · 07-16-2010, 08:14 PM

Quote:

Originally Posted by alextremo

Yup - "for the wind" is the command that deactivates the PROcede's voice activated throttle control

I'm thinking the same thing. I'm telling you guys, there is some voice command coming to the Procede we still don't know about.

Darth335 · 07-16-2010, 08:23 PM

Way to go, that is amazing Shiv! Procede looks better and better everyday.

dlbrooks18 · 07-16-2010, 08:27 PM

wow, that's pretty cool! I want..

AltecBX · 07-16-2010, 08:37 PM

Shiv, does these maps have the extra low rpm torque you mentioned a few days ago?

OpenFlash · 07-16-2010, 08:41 PM

Nope. Tune-wise, the current maps are the same as they have been for months. Just new features enabled.

onesuperboi · 07-16-2010, 08:59 PM

Shiv, did you see the new thread with CP-E boost guage?

http://www.e90post.com/forums/showthread.php?t=409131

WTF? Honestly, can you really patent such a thing?

And also, their boost gauge using the speedo is terrible. I was really confused, and I'd be more confused not knowing how fast I'm going.

FotiosF90M5 · 07-16-2010, 09:04 PM

I have the rixster gauge and just tried out this new procede feature and its very accurate. I LOVE having the digital with peak recall and the analog as well. I think its easier to see how well the car is holding boost. I love this feature. Very accurate and responsive. great job vishnu!

MisterSkiMask · 07-16-2010, 09:07 PM

gimmicky and stupid, just like on the other one

(equal opportunity offender)

zsapphire7 · 07-16-2010, 09:08 PM

just to be clear.... the maps we are supposed to run with firmware 19 are the maps from 6-16 correct?

07-16-2010, 06:21 PM	#111
supracg Banned 7 Rep 320 Posts Drives: 135i Join Date: Mar 2009 Location: potomac iTrader: (0)	^ that would make it a little more confusing, then each of the dashes would represent boost amounts in the decimals rather than just 1, 2, 3 psi etc
	Appreciate 0 Quote

07-16-2010, 07:37 PM	#113
AltecBX Colonel 336 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	Shiv, what do you say at the last bit in the video. "For the wind"? __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

07-16-2010, 07:38 PM	#114
Clap135 Brigadier General 105 Rep 3,460 Posts Drives: 2009 N54 Join Date: Jul 2009 Location: Sticky's Mom House iTrader: (1)	I don't think cpe intentions were to tell vishnu to fuck off lol. I think they have a patent date as proof that they are not copying what the procede is doing, but thats just my opinion
	Appreciate 0 Quote

07-16-2010, 07:57 PM	#118
Clap135 Brigadier General 105 Rep 3,460 Posts Drives: 2009 N54 Join Date: Jul 2009 Location: Sticky's Mom House iTrader: (1)	who cares? lol I am simply talking about guages moving to show boost. We all know vishnu was the first with CAN, the others followed/copied. Back on topic, im really shocked how responsive this fuel guage thing is. Just reving my car in nuetral the thing ramped up to 8psi in a heart beat and shot right back down to zero when the bov went off. Impressive
	Appreciate 0 Quote

07-16-2010, 07:59 PM	#119
flipdsm Private First Class 17 Rep 108 Posts Drives: 2007 335i Coupe Join Date: Feb 2010 Location: Orange County iTrader: (1)	In-Dash working perfectly on my car __________________
	Appreciate 0 Quote

07-16-2010, 08:00 PM	#120
jpsimon Team Zissou 3154 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	+1, this works so well!
	Appreciate 0 Quote

07-16-2010, 08:03 PM	#121
flipdsm Private First Class 17 Rep 108 Posts Drives: 2007 335i Coupe Join Date: Feb 2010 Location: Orange County iTrader: (1)	Ever thought of a digital boost gauge? Like have it read boost where it says current miles until empty, average mpg, etc? __________________
	Appreciate 0 Quote

07-16-2010, 08:04 PM	#122
themyst Major General 189 Rep 6,631 Posts Drives: '16 MK7 GTI Join Date: Feb 2009 Location: NYC iTrader: (8)	my god I go stock for a few days and it feels like Christmas all over again. Since I have a boost gauge already the feature is not useful to me just yet, but when meth flow, IATs, et. al are ready for this, this will be a SICK feature! __________________ E90 LCI N54 6AT
	Appreciate 0 Quote

07-16-2010, 08:23 PM	#125
Darth335 Captain 69 Rep 702 Posts Drives: 2011 AW E92 M3 ZCP Join Date: Jun 2009 Location: SoCal iTrader: (16)	Way to go, that is amazing Shiv! Procede looks better and better everyday.
	Appreciate 0 Quote

07-16-2010, 08:27 PM	#126
dlbrooks18 Brigadier General 164 Rep 3,735 Posts Drives: e90 335i Join Date: Nov 2008 Location: Los Angeles iTrader: (2)	wow, that's pretty cool! I want.. __________________ 2008 E90 335
	Appreciate 0 Quote

07-16-2010, 08:37 PM	#127
AltecBX Colonel 336 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	Shiv, does these maps have the extra low rpm torque you mentioned a few days ago? __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

07-16-2010, 08:41 PM	#128
OpenFlash 1806 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Nope. Tune-wise, the current maps are the same as they have been for months. Just new features enabled.
	Appreciate 0 Quote

07-16-2010, 08:59 PM	#129
onesuperboi Major 53 Rep 1,357 Posts Drives: '08 e92 335i COBB 4.01 Stage 1 Join Date: Aug 2008 Location: Bay Area, CA (Alameda) iTrader: (6)	Shiv, did you see the new thread with CP-E boost guage? http://www.e90post.com/forums/showthread.php?t=409131 WTF? Honestly, can you really patent such a thing? And also, their boost gauge using the speedo is terrible. I was really confused, and I'd be more confused not knowing how fast I'm going.
	Appreciate 0 Quote

07-16-2010, 09:04 PM	#130
FotiosF90M5 ///M Specialist South Shore BMW 801 Rep 7,109 Posts Drives: 2021 M5 Comp BHG/Silverstone Join Date: Jan 2007 Location: South Shore, MA iTrader: (62)	I have the rixster gauge and just tried out this new procede feature and its very accurate. I LOVE having the digital with peak recall and the analog as well. I think its easier to see how well the car is holding boost. I love this feature. Very accurate and responsive. great job vishnu! __________________ 2021 M5 COMPETITION LCI Brands Hatch Gray on SIlverstone, carbon roof, comp wheels, Mperf splitter, carbon pro spoiler, carbon diffuser , carbon paddles, executive pkg. Dinan HAS, RaceChip, dinan spacers, FC stud kit, etc
	Appreciate 0 Quote

07-16-2010, 09:07 PM	#131
MisterSkiMask Banned 149 Rep 2,014 Posts Drives: I Can not say Join Date: Nov 2005 Location: you must not know iTrader: (0)	gimmicky and stupid, just like on the other one (equal opportunity offender)
	Appreciate 0 Quote

07-16-2010, 09:08 PM	#132
zsapphire7 Colonel 111 Rep 2,368 Posts Drives: 08 e92 M3 Join Date: Oct 2007 Location: SF Bay Area iTrader: (21)	just to be clear.... the maps we are supposed to run with firmware 19 are the maps from 6-16 correct?
	Appreciate 0 Quote