[Expert@ApexWheels]

Originally Posted by Ziggyrama

Starting to think about a new set of wheels/tires for my '22 G42 xdrive, non-ZTK, and after going through this thread, I think I want to go with a square setup. I am stock height and not planning to do any lowering anytime soon. How wide of a wheel can I fit? 19x9.0 sounds like a sure bet, how about 19x9.5? Would I have clearance issues?

Also, looking at TPMS sensor, Huf UVS7050-RDE077 looks like the right part to go with the wheels. What am I in for as far as programming? I think I saw some posts that the car can discover them on its own, is that true? Or do I need a tool to program them in?

Read this post for an idea of how the 19x9.5 ET25 fits on the car: https://g87.bimmerpost.com/forums/sh....php?t=1985999
The featured car has the ZTK package so the fender extensions help to reduce visual poke, but they don't improve clearances compared to a standard car.

9" square is indeed a sure thing with the right tires.

RDE077 is the correct sensor and is preprogrammed. The sensors don't need to be paired to the car with a tool, but I believe you'll need to initialize them through iDrive after they're installed.

-Tom

[Coconut]

Bronze look on a budget. This is what 7 months of filth looks like on Apex VS-5RS forged wheels in Brushed Clear finish. Finally detailed the car yesterday.

[Expert@ApexWheels]

Originally Posted by Coconut

Bronze look on a budget. This is what 7 months of filth looks like on Apex VS-5RS forged wheels in Brushed Clear finish. Finally detailed the car yesterday.

What a before and After! This is why I always buy Anthracite.

-Tom

[Jashue]

That looks sensational.
Question: are those OEM roundels? I'm planning to have mine put on my VS-5RS wheels next week, and I'm hoping that they fit without issue.

[cannockwolf]

Originally Posted by Jashue

That looks sensational.
Question: are those OEM roundels? I'm planning to have mine put on my VS-5RS wheels next week, and I'm hoping that they fit without issue.

Yep i have transfered min over

[cannockwolf]

Originally Posted by cannockwolf

I'd love to get a set of these in Motorsport Gold, these wheels suit the car so much! but it's too much money for me atm, perhaps in the future.

heres the future

[Coconut]

Originally Posted by Jashue

That looks sensational.
Question: are those OEM roundels? I'm planning to have mine put on my VS-5RS wheels next week, and I'm hoping that they fit without issue.

Yes, OEM roundels. They fit but not snug, they will rotate on the wheel. I used 4 dabs of hot glue from the backside of the roundel to keep them in place.

[Coconut]

[Jashue]

Installed the Apex VS-5RS Wheels today with brand new Michelin PS4S tires. I'm very pleased. Square set-up— 255s all around. I was mildly concerned about the poke with the wider (than stock) tires up front. It looks fine to me!

Here are a couple of shots for those of you wondering about fitment and aesthetics...

[viperx100]

Originally Posted by Jashue

Installed the Apex VS-5RS Wheels today with brand new Michelin PS4S tires. I'm very pleased. Square set-up— 255s all around. I was mildly concerned about the poke with the wider (than stock) tires up front. It looks fine to me!

Here are a couple of shots for those of you wondering about fitment and aesthetics...

Looks great, broski! Did you go with 19x9 ET 25 all around?

[AlexC2er]

Originally Posted by Jashue

Installed the Apex VS-5RS Wheels today with brand new Michelin PS4S tires. I'm very pleased. Square set-up— 255s all around. I was mildly concerned about the poke with the wider (than stock) tires up front. It looks fine to me!

Here are a couple of shots for those of you wondering about fitment and aesthetics...

Let me know if you are getting any rubbing

[M240iWhizz]

Originally Posted by Expert@ApexWheels

A calculator like this is invaluable when you’re trying to figure out where the wheels will actually sit relative to the factory wheels. Compared to the 19x8.5 ET25 wheels (893m), they'll be 6.4mm more aggressive. The rear wheels are indeed the 19x10 ET38 wheels which are shown below. If you had to have a 19x9.5" rear, we offer a 19x9.5 ET25 wheel for the Supra that would be an option, but it would be an aggressive fitment.

For visual reference here is a 19x9 ET28 SM-10 APEX wheel on the front of a 2 series: (going large with these, expand as needed)






-Tom

Just to double confirm: the rears on this example are 19x10 ET38 wheels?
Is the car lowered at all?
Getting very close to pull the trigger